Bluelab

The 2.77EC solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/ppm probe. Calibration Solution should be stored in a cool place out of direct sun and heat. Please keep out of reach of children. They should be stored with the lids securely tightened.""

The Bluelab Carry Case provides a custom fit so you can use and read your Bluelab Meter right from the carry case. A firm outer casing offers impact reduction for your Meter. There are two pockets in the top of the case especially made for meter probes. The internal strap is a tidy way to tuck away the probe cables. Removable and adjustable straps provide even more comfort and convenience. The strap can be hung on the wall or used over your shoulder, keeping the Meter safe and dry in the carry case so only the probes go into the nutrient container. Ideal for use with the following Bluelab Meters: Bluelab Combo Meter, Bluelab pH Meter, Bluelab Soil pH Meter, Bluelab pH and ppm Pens. Meter not included with case.

The Bluelab Combo Meter is a conductivity, pH and temperature meter all-in-one. As the Bluelab Combo Meter is portable and does not require a power supply to operate, it can be used anytime and anywhere to help you manage your crops' daily nutrient requirements. Simple push button pH calibration. Successful pH calibration indicators. Low battery indicator. Over range and under range indicators. Display options available in degrees C and F, EC, CF, ppm 500 and ppm 700. Supplied with 2x AAA alkaline batteries, replaceable double junction pH probe and solution sachets. 5 year Bluelab Guarantee (6 months for pH probe).

The Bluelab Combo Meter Plus is an all-in-one, convenient portable solution for accurate measurement of pH, conductivity and temperature in nutrient solution. The battery-powered, lightweight unit can be used anywhere, anytime to measure critical parameters related to nutrient uptake in plants. The Bluelab Leap pH probe also allows fast and accurate pH measurements direct from the root zone in a wide range of growing media including soil, rockwool, coco coir and potting mixesno more pH slurries or extraction mixes. The detachable Leap pH probe has a toughened spear-tip for improved durability and is lightning fast in nutrient solution. Easy-to-read backlit screen for lowlight environments and simple push button operation to view your chosen parameter. Probe cable length is 2 m/6.5 ft.

With a conductivity range right up to 6.0 EC (60 CF, 3000 ppm x 500 and 4200 ppm x 700), it will never leave you short. The Commercial Truncheon Nutrient Meter has been designed for hydroponic crops that require a higher than normal EC or ppm requirement during their growing cycle. It is super tough, fully waterproof, has no on/off buttons to worry about and does not need calibrating. EC (0.46.0), CF (460) and ppm scales (TDS and 700 scale). Auto sense on and off. Battery life minimum 1 year (or shelf life of battery). Meter length: 40.7cm or 16 1/32in. 5 year Bluelab Guarantee.

Measures conductivity and temperature. Selectable units for conductivity and temperature. Backlit LCD display with low battery warning. Successful calibration indicator and calibration is optional. Fully waterproof. Auto off function and hold reading function. Automatic temperature compensation. Units: EC, 500 ppm, 700ppm, C, F. Range: 0.010.0 EC, 05000 ppm (500 ppm), 07000 ppm (700 ppm) and 050C/32122F. Resolution: 0.1 EC, 10 ppm (500 ppm), 10 ppm (700 ppm) and 1C/1F. Accuracy @ 25C: 0.1 EC (@ 2.77 EC), 50 ppm (500 ppm) (@ 1385 ppm), 70 ppm (700 ppm) (@ 1940 ppm) and 1C / 2F. Battery type: 1 x AAA alkaline.

Get Connected. Improve crop performance and reduce errors with the power of data and remote monitoring. Receive wireless monitoring data from all Bluelab Connect devices to your computer and smartphone or tablet. Receive important push notifications on your mobile device so you can respond immediately to changes, support growing decisions and improve crop performance. Send wireless data 100m/330ft to and from Connect devices within the growing environment and up to 400m/1312ft in open space (line-of-sight). Only one Connect Stick 2 required to receive wireless data from up to 50 Connect devices. Send Bluelab Connect wireless data further in large growing facilities and environments. Simply plug the Bluelab Connect Range Extender 2 into a power supply between Bluelab Connect devices and Bluelab Connect Stick 1 or 2 to increase the wireless signal range. For extra-long distances, multiple Bluelab Connect Range Extender 2s can be used. Increase the wireless range between Bluelab Connect devices and the computer by up to four times when Connect Range Extender 2 is paired with Connect Stick 2.

Get Connected. Improve crop performance and reduce errors with the power of data and remote monitoring. Receive wireless monitoring data from all Bluelab Connect devices to your computer and smartphone or tablet. Receive important push notifications on your mobile device so you can respond immediately to changes, support growing decisions and improve crop performance. Send wireless data 100m/330ft to and from Connect devices within the growing environment and up to 400m/1312ft in open space (line-of-sight). Only one Connect Stick 2 required to receive wireless data from up to 50 Connect devices. Send Bluelab Connect wireless data further in large growing facilities and environments. Simply plug the Bluelab Connect Range Extender 2 into a power supply between Bluelab Connect devices and Bluelab Connect Stick 1 or 2 to increase the wireless signal range. For extra-long distances, multiple Bluelab Connect Range Extender 2s can be used. Increase the wireless range between Bluelab Connect devices and the computer by up to four times when Connect Range Extender 2 is paired with Connect Stick 2.

Use the Bluelab External Lockout & Alarm Box to connect the Bluelab Pro Controller to external switches, for example, a float switch or a greenhouse alarm system. When these switches are activated, the Bluelab Pro Controller is placed in lock-out mode, so no further dosing will occur until reset. Comes with built-in alarm that can be disabled if required. It can be connected to an external alarm (horn or flashing light).

The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success. Just one Bluelab Connect Stick is required to receive wireless data from one or more Guardian Monitor Connects.

Adjustable brightness display. Large easy-to-read, plant-safe green LED displays. Selectable values for conductivity and temperature. Simple push button pH calibration system. No calibration required for conductivity and temperature. Silent alarm for both high and low settings. Settings retained when power lost (non-volatile memory). Temperature compensation. An international power supply. Water-resistant design. 2 year Bluelab Guarantee (6 months on probe).

The Bluelab Guardian Monitor Connect In-Line is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success. For remote or cloud access, the computer you are already data logging to will need permanent internet access. It includes simple 1 button calibration for pH 7 and pH 4, personalized alarm settings, high-pressure in-line pH probe with 3/4 ft NPT thread, adapter collar to increase pH probe thread to 1 ft NPT and conductivity probe with 1 ft NPT thread.

Adjustable brightness display. Large easy-to-read, plant-safe green LED displays. Selectable values for conductivity and temperature. Simple push button pH calibration system. No calibration required for conductivity and temperature. Silent alarm for both high and low settings. Settings retained when power lost (non-volatile memory). Temperature compensation. An international power supply. Water-resistant design. 2 year Bluelab Guarantee (6 months on probe).

The Bluelab Guardian Monitor Connect In-Line is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success. For remote or cloud access, the computer you are already data logging to will need permanent internet access. It includes simple 1 button calibration for pH 7 and pH 4, personalized alarm settings, high-pressure in-line pH probe with 3/4 ft NPT thread, adapter collar to increase pH probe thread to 1 ft NPT and conductivity probe with 1 ft NPT thread.

The perfect, portable way to accurately measure and monitor pH levels in a wide range of media. We have combined the Bluelab Multimedia pH Meter and Bluelab Leap pH Probe to take fast, accurate measurements in nutrient solution, soil, coco coir, rockwool, potting mix and many other media types. Calibration is simple with one push button on the meter and fresh Bluelab Calibration Solutions. Successful calibration indicator is displayed on screen for 30 days to indicate when re-calibration is required. The Bluelab Leap pH Probe is suitable for use with all Bluelab products that use a BNC connection. Team with the Bluelab Solutions and the convenient Bluelab Carry Case (#716440). 2 m / 6.6 ft standard cable included.

The perfect, portable way to accurately measure and monitor pH levels in a wide range of media. We have combined the Bluelab Multimedia pH Meter and Bluelab Leap pH Probe to take fast, accurate measurements in nutrient solution, soil, coco coir, rockwool, potting mix and many other media types. Calibration is simple with one push button on the meter and fresh Bluelab Calibration Solutions. Successful calibration indicator is displayed on screen for 30 days to indicate when re-calibration is required. The Bluelab Leap pH Probe is suitable for use with all Bluelab products that use a BNC connection. Team with the Bluelab Solutions and the convenient Bluelab Carry Case (#716440). 2 m / 6.6 ft standard cable included.

The instrument is only as accurate as the probe is clean. Probe cleaning is one of the most important parts of owning or operating any Bluelab meter, monitor or controller. If the probe is contaminated or dirty, it affects the accuracy of the reading displayed. Conductivity kit contents: instructions, 500ml 2.77 EC solution, plastic cup, conductivity probe cleaner and chamois (probe cleaning instrument).

With its super tough, high-quality, fully waterproof design, no calibration required, daylight readable blue LEDs and no on/off buttons to worry about, the Bluelab Truncheon Nutrient Meter has proven itself as the world's favorite nutrient meter. It is powered by three standard AA batteries. EC (023.6), CF (236) and ppm scales (TDS and 700 scale). Fully waterproof design. No calibration required. Auto sense on and off. No external switches or adjustable buttons. Meter length: 40.7cm or 16 1/32in. 5 year Bluelab Guarantee.