GAVITA

These 2 inch bracket assembly kits are used to hang your Gavita fixture on a unistrut or rail system. A single kit includes 1- long bracket, 1- short bracket, 2- M6 bolts, 2- M6 nuts.

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The 3 way cable splitter is needed to connect the Gavita Master Controller to your E-Series ballasts when running ballasts inline. Used with Gavita E-series interconnect cables.

3-way splitter with 6P6C connection jacks. This is a 4 piece kit.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP68 Wieland RST plug. Choose from 3 ft 3 in/1 m, 6 ft 6 in/2 m or 10 ft/3 m in length.

The Gavita Pro 315e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

The Gavita Pro 315e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

The Gavita Pro 630e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

The Gavita Pro 630e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100 mol, 1000 watt DE lamp. These fixture are equipped with what we call the Gavita repeater bus. The Gavita repeater bus solution allows you to daisy chain your controller cables from one fixture directly to the other. Each fixture has an input and an output, buffering the signal for the next fixture. This allows us to put 100 fixtures in one daisy chain. On each controller port you can connect 5 chains with 100 fixtures. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment. Customer must select cord and mounting options.

These are packaged bulk for commercial applications. The Gavita housing keeps the electronics cool, significantly reducing the possibility of faults and extending its operating life. In independent tests, the Electronic fixture came out as the coolest. Comes with our HR96 reflector that is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. The Gavita Electronic DE comes with a Gavita Pro Plus 2,100 mol, 1000 watt DE lamp. This professional fixture requires installation by a certified electrician in an industrial environment. 1 year warranty on the lamp.

Our HR96 reflector is made of a very high grade Miro aluminum with 95% efficiency, which provides optimal reflectance of light to your crop. The shape of this reflector may look as a deep reflector, but it actually gives you a medium wide beam angle of about 135 degrees! The spread of the Pro 1000 equipped with the HR96 DE reflector is about 4 x 6 ft (110 x 180 cm) at 3 ft distance in overlapping plans, providing light levels of up to 1000 mol s-1 m-2. For double-ended 1000 watt lamps. Lamp not included. Reflector dimensions: 20.1 in long x 9.6 in wide x 7.6 in high.

HortiStar 600 SE has a replaceable Miro aluminum reflector with 95% efficiency. This fixture is suitable for HPS and MH lamps 600 watt to 750 watts. The lamp cord terminal is shielded by a metal housing. Installation is very easy with two eye bolts. Comes with 13 ft lamp cord. Reflector dimensions: 20.1 in long x 9.6 in wide x 7.6 in high.

Gray interconnect cables used for Gavita fixtures that are equipped with double RJ connectors also know as Gavita Repeater Bus system. You can easily recognize them as they are gray instead of black, and have ferrite coils on each end to minimize interference of external signals. A standard 6.5 ft cable is included with every fixture to connect it to the next. Choose from these additional sizes of cable or create custom lengths with the 25 m/8 ft roll.

Gray interconnect cables used for Gavita fixtures that are equipped with double RJ connectors also know as Gavita Repeater Bus system. You can easily recognize them as they are gray instead of black, and have ferrite coils on each end to minimize interference of external signals. A standard 6.5 ft cable is included with every fixture to connect it to the next. Choose from these additional sizes of cable or create custom lengths with the 25 m/8 ft roll.

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

Pair of eyebolts with M6 hex nuts to hang your Gavita lighting fixtures. Pair of eyebolts with M6 hex nuts to hang your Gavita lighting fixtures. Includes 2 M6 eye bolts and 3 M6 hex nuts.

Gavita Pro Plus 1000W EL Double-Ended 400 V lamp is one of the best 1000 watt HPS lamps on the market. Specifically designed for high frequency electronic ballasts, it has a connection at each side of the lamp, removing the need for a frame wire inside the lamp. For use with Gavita fixtures only. The jacket of this double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp. Warranty applies only if these lamps are operated with a Gavita Pro series ballast.

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100 mol, 1000 watt DE lamp. These fixture are equipped with what we call the Gavita repeater bus. The Gavita repeater bus solution allows you to daisy chain your controller cables from one fixture directly to the other. Each fixture has an input and an output, buffering the signal for the next fixture. This allows us to put 100 fixtures in one daisy chain. On each controller port you can connect 5 chains with 100 fixtures. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment. Customer must select cord and mounting options.