1/2" or 3/4" Self-Piercing Barb 10 gph Plastic Green PC Series Pressure Compensating Medium Flow 1-Outlet Drip Emitter | RBXPC10

Specifications

Brand	Rain Bird
Case Quantity	200
Tubing Compatibility	1/2 in. or 3/4 in.
Emitter Type	Drip Emitter
Packaging	10/Inner Carton
UPC	753810002565

Shop for Rain Bird Drip Emitter, 1/4 Self-Piercing Barb Plastic PC 1-Outlet Pressure-Compensating Module - Barb Inlet, 5.0 GPH, Light Brown Most compact and unobtrusive emitters Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar) Self-piercing barbs for quick one-step emitter insertion into 1/2" or 3/4" drip tubing Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate Features and Benefits Point-source medium-flow emitters for watering larger shrubs and trees. The only emitters with self-piercing barbs, making them the easiest to install using the Xeriman™ tool. Widest selection of pressure-compensating emitters, with 6 flow rates and 2 inlet options. Product Details Emission Device Type: Single-outlet Emitter Inlet Type: Barb Flow Rate: 5.0 gph Operating Range Pressure: 10 to 50 psi (0.7 to 3.5 bar) Required filtration: 100-mesh (150-micron) *Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).