1" Gray Glass-Filled Nylon 150 psi with Flow Control Electric Valve | WMTSB10F

Key Features

• 100% water tested
• Unique "reverse flow" design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent "stretching" a common cause of valve failure
• Reverse flow design for water conservation in the event of failure
• Diaphragm's self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
• Molded shock cone for smooth operation and reduction of water hammer
• Easy-to-use internal manual bleed lever, bleeds valve downstream, has positive stops for open and closed positions
• Marine grade S20P solenoid with stainless steel actuator
• High strength glass filled body and cover with 1/4 in. stainless steel cover bolts and mating brass body inserts
• Non rising flow control stem throttles valve from full open to closed position on flow control models