2.4 m 360 Degrees Male 0.2 to 9.9 lpm Green Precision with Pressure Compensating Device Spray Nozzle | TOLOT8FP

Key Features

• Precision PC spray nozzles deliver an industry leading 25 mm/hr precipitation rate, the unique method of projecting water significantly reduces the amount of water required to reach each radius and better matches soil infiltration rates, compared with other leading brands, the lower precipitation rate and high distribution uniformity makes the PSN PC the most efficient nozzle from 1.5 to 4.6 m
• Using patented technology and no moving parts, water expands and collapses inside the H2O chip creating high frequency oscillating streams to achieve the desired arc and radius, invisible to the naked eye, these oscillating streams can be detected with a strobe light
• The elastomeric PCD disk opens and closes in response to changes in inlet pressure to maintain optimal performance, at pressures above 276 kPa
• The H2O chip creates a very uniform droplet size across the irrigation arc by exerting exactly the same amount of pressure on each individual stream of water as it is created in the chamber, this increases irrigation uniformity and wind-resistance, minimizing unintentional watering of hardscapes and run-off
• The precision PC nozzle housing is a single molded piece, unlike sonic welded competitor units, there is no possibility of the top half of the nozzle separating from the bottom, therefore no wasted water, no water starved section of landscape and no moving parts to wear out
• The lower flow rate of precision PC nozzles maximizes design efficiency and saves on overall material costs by using fewer valves and less controller stations, existing systems with low pressure can be fixed with a simple retrofit of the existing high flow nozzles