Welcome To GL Irrigation & Landscape Supply

24 VAC Output Outdoor Wireless 20 cm x 7.6 cm Polycarbonate Rain/Freeze Sensor and Receiver | HTRWRFC

Out of stock
0.00
(0 reviews) Write a review
WRFCLIK
Request Quote

Minimum quantity for "24 VAC Output Outdoor Wireless 20 cm x 7.6 cm Polycarbonate Rain/Freeze Sensor and Receiver | HTRWRFC" is 1.

Chat Now

Key Features

  • Instant quick response rain shutoff and freeze shutoff at 3° C
  • Maintenance-free design with integrated battery for wireless models
  • Adjustable vent ring allows for shorter or longer reset period
  • Rugged polycarbonate housing and metal extension arm
  • Includes gutter bracket and wall mount with wireless models
  • Compatible with most normally open or normally closed irrigation controllers
  • Time to turn off irrigation system: 2-5 min for the Quick Response™ feature
  • Time to reset the Quick Response™ unit: 4 hr maximum under dry sunny conditions
  • Time to reset: 3 days maximum under dry sunny conditions for the total rainfall compensation unit
  • UV colorfast and stable materials

Tell us what you need

Description

Specifications

BrandHunter
Case Quantity12
MaterialPolycarbonate
Output Current3 A
Output Voltage24 VAC
Sensor Size20 x 7.6 cm
Sensor TypeRain - Freeze Sensor
Wired or WirelessWireless
For Use WithMost Normally Open or Normally Closed Irrigation Controllers
UPC0611698160060

Shop for Hunter Rain/Freeze Sensor and Receiver, 24 VAC Outdoor Wireless 20 cm x 7.6 cm Product Type: Rain and Freeze Sensor Sensor Connection: Wireless Compatible with most irrigation controllers Features and Benefits Most rain-sensing devices work by accumulating a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. In that "accumulation time", the system will unnecessarily continue to water. This can look especially bad for conservation-conscious municipalities, businesses, and residences. With built-in Quick Response technology, the Hunter Rain-Clik and Wireless Rain-Clik can command a controller to shut off right when it starts to rain. The Rain-Clik can be mounted on an eave or any flat vertical surface like a wall or fence. A gutter mount is also available that allows for easy installation of the Rain-Clik on the edge of a gutter. Maintenance-free design with integrated battery for wireless models Adjustable vent ring allows for longer or shorter reset period Rugged polycarbonate housing and metal extension arm Wired models include 25' of 20 AWG sheathed, two-conductor, UL-approved wire Wireless model range is 800' line of sight from sensor to receiver Multiple receivers can be operated from a single sensor Warranty period: 5 years Compatible with most irrigation controllers Product Details Wiring: "normally open" or "normally closed" Time to turn off irrigation system: 2 to 5 minutes approx. for Quick Response Time to reset Quick Response: 4 hours approx. under dry, sunny conditions Time to reset when fully wet: 3 days approx. under dry, sunny conditions Switch rating: 24 VAC, 3 A Freeze sensor shuts system off when temperatures fall below 37° F (Rain/Freeze-Clik model) System operating frequency: 433 MHz (wireless model) Installing Clik sensors allows a controller to sense rapidly changing weather and react to individual conditions like rain, high wind, or freezing temperatures.

Reviews

Average Star Rating:
0.00 (0 reviews Total)
  • 5 stars
    0
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
Have you used the product?
Tell us something about it and help others make the right decision
Show reviews with:
5 stars (0 reviews)
4 stars (0 reviews)
3 stars (0 reviews)
2 stars (0 reviews)
1 star (0 reviews)

No reviews found