8 Stations Modular HCC Series Wi-Fi Controller | HTRHCC800PP

Key Features

• Standard programming option allows for six independent irrigation programs and six start times per program
• Advanced programming option provides station based programming with up to six total start times available
• Any two programs or stations can operate simultaneously, providing more efficient watering
• Two sensor inputs available for use with any click sensors and HC flow meter
• 1 P/MV output for pump start relay and master valve activation
• Wi-Fi enabled for quick-connection to Hydrawise™ software
• 3-1/4 in. full color touchscreen display for simple programming at the control panel
• Built-in milliamp sensor for wire fault detection and alerts
• All Hydrawise™ compatible controllers connected to Hydrawise web-based software are EPA WaterSense approved smart watering controllers
• Hydrawise Predictive Watering™ allows the controller to adjust schedules based on forecasted temperature, rainfall probability, wind and humidity to provide the maximum water savings you come to expect from a Hunter® smart controller
• The HCC controller has a full graphical touchscreen interface, which allows for programming and manual operation at the controller, with or without Wi-Fi connectivity
• Daily schedule adjustments based on local weather data monitor past, current and forecasted temperature, rainfall, humidity and wind speed, this allows for adjustments of watering times and schedules to balance water savings with water efficiency for plants
• Monitor your piping and sprinklers with an optional HC flow meter, receive automatic alerts when a pipe is broken to prevent property damage
• The HCC continuously monitors electrical current flowing to solenoid valves, if the current is too high or too low, Hydrawise™ will send an alert to indicate which valve is not working properly
• This water saving feature allows the operator to specify a maximum cycle time for each single station in hours, minutes or seconds, followed by a minimum soak time, to prevent run-off from slopes or saturated soil
• The programmable rain delay feature incorporates a user specified number of days to keep the controller in the Off mode, then allows for the system to automatically revert back to scheduled irrigation
• Users can program a delay between stations as the controller advances from one station to the next