LED Grow Lights

Our AgroLED 6W green lamp makes it possible to work and control your plants when they are in their night cycle. The lamp is 530 nm wavelength green light. Anodized heat sink cools by natural convection. E26 standard Edison base. 550 lumens. 120-277 volt.

The 41 or 21 watt Bloom iSunlight T5 HO replacement LED lamps are an excellent choice for the complete cycle of your plants' life. The iSunlight T5 Bloom lamp is an intelligent LED that is specifically designed to work with your existing T5 HO fluorescent fixture. These T5 LED retrofit lamps make an excellent replacement for all 3,000 K T5 fluorescent lamps. The iSunlight Bloom features a combination of 450 nm blue, 660 nm red and 5,500 K full spectrum white diodes while consuming only 21 watts of power for the 2 ft lamp and 41 watts of power for the 4 ft lamp. Environmentally friendly, mercury-free LED lamps. Not compatible with HF Agrobrite T5 fixture.

The AgroLED® iSunlight® Green T5 replacement LED lamps make it possible to work and control your plants when they are in their night cycle. The 530 nm is the ideal wavelength of green. These iSunlight® T5 lamps are an intelligent LED that are specifically designed to work with your existing T5 fluorescent fixture, including the single lamp Sun Blaze® Strip Light or Strip Light Supremes. These LED T5 lamps are environmentally friendly and mercury-free. Not compatible with HF Agrobrite T5 fixture.

The AgroLED iSunlight VEG + UV T5 replacement LED lamps are designed for the vegetative period of your plants' life cycle, featuring 80% 5500 K, 10% 460nm blue and 10% 380 nm UV. These iSunlight T5 lamps are an intelligent LED that are specifically designed to work with your existing T5 fluorescent fixture. These LED T5 lamps are environmentally friendly and mercury-free. Not compatible with HF Agrobrite T5 fixture.

The 41 or 21 watt 5,500 K T5 HO replacement LED lamps are an excellent choice for the propagation and veg cycles of your plants life. The iSunlight T5 lamps are an intelligent LED that is specifically designed to work with your existing T5 HO fluorescent fixture. The iSunlight 4 ft lamp produces over 4,900 lumens with only 41 watts of consumed power and the 2 ft lamp produces over 2,400 lumens with only 21 watts of consumed power. These are environmentally friendly and mercury-free lamps. Not compatible with HF Agrobrite T5 fixture.

These environmentally friendly ArgoLED Sun 48 fixtures produce over 21,900 lumens and 316.806 PPFD from only 187 watts of consumed power. White powder-coated steel housing is durable with louvers to ensure proper thermal management. V-hangers are included with every fixture that allows the fixture to hang vertically or horizontally. 8 foot power cord and on/off switch allows for easy operation. Daisy chain feature makes for an ideal installation for multiple fixtures to be plugged together. This 6,500 K LED fixture is the smart choice for prop and veg cycles of your plants' life.

These energy-efficient LED fixtures deliver a full spectrum of light at 5500 K, making them ideal for early plant growth, propagation and indoor gardening. AgroLED Sun LED strip lights feature a passively cooled, thermally stable design that translates into better performance and a longer life span for you and your plants. The included 5-foot power cord and on/off switch make operation easy, while a daisy chain feature means you can plug multiple fixtures into each other for easy installation. Plus, with the included V-hangers, you can choose whether to hang your lights vertically or horizontally. Lumen output: 12 watt 18 in produces 1300 lumens. 18 W 24 in produces 1800 lumens. 36 W 48 in produces 4025 lumens. Includes a 5 ft power cord with on/off switch, (1) daisy chain cord, (2) hanging brackets with V style hangers, (3) flush mount options. UL Listed.

These earth-friendly AgroLED Sun 211 and Sun 411 Veg LED fixtures offer 3 separate channels for your veg and propagation cycles. The Sun 211 delivers 11,400 lumens and 209.175 PPF from only 142 watts of consumed power, while the Sun 411's 284 watts of power brings 22,500 lumens and 411.231 PPF. These are with all channels on including the 460nm (blue), UV and 6500 K full spectrum white light! Both fixtures are designed to be durable with a powder-coated steel housing and louvers for proper thermal management. Either fixture can be hung vertically or horizontally with the included V-hangers and includes an 8 ft power cord. Each channel, 6500 K, 460nm and UV, can be independently switched for easy operation. The 120 volt daisy chain feature makes for an ideal installation for multiple fixtures to be plugged together.

AgroLED Sun Supreme is an environmentally friendly way to bathe your plants in the light they need, without spending on energy they don't. A built-in reflector and passively cooled design means the AgroLED Sun Supreme light strip doesnt require a fan to ensure proper thermal management, while still providing high output, brilliant performance and a long life span. The Sun Supreme LED delivers an excellent full spectrum of light at 5500 K, making it ideal for early plant growth, propagation and indoor gardening. A 5-foot power cord and on/off switch make operation easy, while the daisy chain feature means you can plug multiple fixtures into each other for easy installation. Plus, with the included V-hangers, you can choose whether to hang your lights vertically or horizontally. Lumen output: 20 W 18 in supreme produces 2300 lumens. 25 W 24 in Supreme produces 2650 lumens. 50 W 48 in Supreme produces 5550 lumens. Includes a 5 ft power cord with on/off switch, (1) daisy chain cord, (2) hanging brackets with V style hangers, (3) flush mount options. UL Listed.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The Gavita Slim Line 2 (SL2) fixture available in 277/347 volt or 480 volt, includes the HR96 Reflector for maximum efficiency and uniformity, designed specifically with broad light dispersion in mind. This commercial style fixture features highly efficient passive ballast cooling that helps contribute to long fixture life. Other features include sealed housing with a Gore-Tex ventilation plug, and controllable output up to 1150 W. The SL2 is also equipped with a Repeater Bus interface. This double port connection enables control of the SL2 with a Gavita EL Series Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains, giving you room to grow.

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

The Gavita Slim Line 2 (SL2) fixture features the W150 Reflector, which has a wide spread for optimal uniformity (150 beam angle). This reflector is best suited to overlapping plans. The SL2 features highly ecient passive ballast cooling that helps contribute to long fixture life. Other features include sealed housing with a Gore-Tex ventilation plug, and controllable output up to 1150 W. The SL2 is also equipped with a Repeater Bus interface. This double-port connection enables control of the SL2 with a Gavita EL Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains, giving you room to grow.

An easy to install mounting bracket, designed to fit in multiple orientations on fixtures that allow for fixtures to be pivoted. The Gavita V2 Hanging Bracket will work on all Gavita SL2 and Sun System Pro Sun 2 fixtures.

These 1-5/8 inch bracket assembly kits are used to hang your Gavita fixture on a unistrut or rail system. A single kit includes 1- long bracket, 1- short bracket, 2- M6 bolts, 2- M6 nuts.

These 2 inch bracket assembly kits are used to hang your Gavita fixture on a unistrut or rail system. A single kit includes 1- long bracket, 1- short bracket, 2- M6 bolts, 2- M6 nuts.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The 3 way cable splitter is needed to connect the Gavita Master Controller to your E-Series ballasts when running ballasts inline. Used with Gavita E-series interconnect cables.

3-way splitter with 6P6C connection jacks. This is a 4 piece kit.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The Pro 900e LED is the solution for indoor growing environments where ceiling height and distance from canopy are paramount. Featuring the same performance and 8-bar configuration of our bestselling Pro 1700e LED, the 900e is a great fit for use in vertical racks, low rooms, over benches, or even in tents. Push plants to their full potential with a fixture tailored to how you grow. At 900 µmol/s, this LED by the leaders in horticultural lighting delivers impressive amounts of crop-loving light without overpowering plants in your setup. And because it operates at 345 W with 2.6 µmol/j—half the power of our best-performing fixture—you get...

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP68 Wieland RST plug. Choose from 3 ft 3 in/1 m, 6 ft 6 in/2 m or 10 ft/3 m in length.

The Gavita Pro 315e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

The Gavita Pro 315e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

The Gavita Pro 630e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

The Gavita Pro 630e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.