Growing Environment

The Evolution-RO1000 KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also reduces iron, hydrogen sulfide and heavy metals in well water. Replace every 2,000 of product water. The Evolution-RO1000 Membrane Element is the standard membrane included with system. Two (2) needed for system. Reduces 94%+ of total dissolved solids. Replace when product water decreases and/or ppm’s increase.

The bulk 1 cubic foot resin is mixed bed, semiconductor grade, and non-color indicating for convenient use.

Brass pressure regulator to adjust your pressure between 0-125 psi. Helps keep pressure within the operating parameters of the Evolution-RO or any other filtration system with a "" inlet fitting. "" Quick Connect (QC) fittings for a easy install.

The Evolution-RO1000 KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also reduces iron, hydrogen sulfide and heavy metals in well water. Replace every 2,000 of product water. The Evolution-RO1000 Membrane Element is the standard membrane included with system. Two (2) needed for system. Reduces 94%+ of total dissolved solids. Replace when product water decreases and/or ppm’s increase.

Wall mount bracket for the Evolution-RO1000. Stainless steel, heavy duty.

This float valve comes with a 1/2 in barbed fitting. Adjustable water level and can be mounted horizontally or vertically. Allows you to fill any tank or reservoir unattended—never flood your garden again! All plastic and stainless steel materials. Better than brass and fully adjustable.

This heavy-duty, non-corrosive PVC float valve is a standard bulkhead tank mount unit with a 0.48 in orifice valve. It allows you to fill your tank or reservoir unattended. Adjustable water level. Never flood your garden again! Construction: NSF approved PVC, 18-8 stainless steel hardware and Santoprene® rubber replaceable seals.

This float valve features a 3/8 in quick connect fitting and adjustable water level. Can be mounted vertically or horizontally. Stainless steel and PVC components. This float valve allows you to fill a reservoir or tank, unattended, to your desired water level. For use with the Evolution RO1000, Tall Boy™ or any other filter systems with 3/8 in tubing.

Gallonage & filter capacity monitor that operates at flow rates between 0.1-1.0 GPM. It accurately tracks the number of gallons of filtered water produced and alerts you when it's time to change your filters. Showing real time flow rates, displayed in gallons or liters. For use with Stealth-RO200/300 GPD models, or most reverse osmosis (RO) systems with " fittings and flow rates up to 1 GPM.

Gallonage and filter capacity monitor operates at flow rates between 0.010.1 GPM. Ultra low flow model. Accurately tracks the number of gallons of filtered water produced and alerts you when it's time to change your filters. Also shows real-time flow rates. Displays in gallons or liters. For use with Stealth RO, Triton RO or any other systems with 1/4 in fittings and flow rates up to 1/2 GPM.

The GroGreen Filter has a customized flow restrictor allowing ideal contact time with filtration media to maximize the reduction of chlorine, sediment, rust, silt, mercury, lead and PCBs (organic chlorine). It will help protect beneficial bacteria to invigorate organic compost, soil amendments, and bio-teas. Easily attaches to your garden hose with 11,000 Gallon Capacity (30 GPD = 365 days), up to 2 GPM. KDF85/Granulated Catalytic Activated Carbon removes up to 99% of chlorine and chloramines.

The Hydroid is the industry’s premier compact, portable commercial water filter at an affordable price. Achieve up to a 4,500 GPD (gallons of water per day) capacity (blended), or 3,000 GPD pure RO water. Not only is the Hydroid powerful, but it can produce a 2 parts product to 1 part wastewater ratio, making it the most efficient system in its class. New, groundbreaking technology for a compact system with commercial scale performance.

The Hydroid is the industry’s premier compact, portable commercial water filter at an affordable price. Achieve up to a 4,500 GPD (gallons of water per day) capacity (blended), or 3,000 GPD pure RO water. Not only is the Hydroid powerful, but it can produce a 2 parts product to 1 part wastewater ratio, making it the most efficient system in its class. New, groundbreaking technology for a compact system with commercial scale performance.

The Hydroid is the industry’s premier compact, portable commercial water filter at an affordable price. Achieve up to a 4,500 GPD (gallons of water per day) capacity (blended), or 3,000 GPD pure RO water. Not only is the Hydroid powerful, but it can produce a 2 parts product to 1 part wastewater ratio, making it the most efficient system in its class. New, groundbreaking technology for a compact system with commercial scale performance.

Options from 6,000 GPD to 19,000 GPD, depending on water source. Liquid filled pressure gauges for pre-filter in and out, concentrate pressure and system pressure. Stainless steel multistage high pressure RO pump with SS pump throttling valve. 5 micron 20 in x 4.5 in cartridge filter & housing sediment pre-filter. System control, recycle control and pump throttle valves.

Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output

Poly Spun Sediment Filters are a pre-filter that will reduce silt, rust, dirt, sand and sediment. #728885 is 10 in x 2.5 in. #741658 is 20 in x 2.5 in.

Micro sized, portable reverse osmosis system. 75 gallons per day. Includes KDF85/carbon pre-filter and 75 GPD membrane. Also comes with garden hose connector, 1/4 in shut off valve and pressure gauge. Features an external flow restrictor for 2:1 drain to product water ratio for maximum efficiency. Replaceable carbon pre-filter. KDF85 media added into carbon pre-filter for chloramines and heavy metal reduction. Metal bracket—filter is stable on a flat surface or can be wall mounted. Easy to monitor with integrated pressure gauge with safe zones. Automatic shut off valve so drain line shuts down when product line is shut down. USA made. High...

KDF/Catalytic Carbon Filters reduce iron, sulfur, chlorine, chloramines and heavy metals. Great for city or well water! Doubles standard green carbon filter. #741622 is 10 in x 2.5 in. #741624 is 20 in x 2.5 in. #741626 is 20 in x 4.5 in.

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output

Hydro-Logic® Chlorashield membranes remove 100% of chloramine and are great for city water. Rated at 1 GPM down to 1 micron. They are made in the USA and have a low pressure drop combined with exceptionally high dirt holding capacity. HGC728772 is for Evolution-RO systems (20 in x 2.5 in) and should be replaced after 2,500 gallons. HGC741668 is for TallBoy systems (20 in x 2.75 in) and should be replaced after 6,000 gallons. HGC741640 is for PreEvolution systems (10 in x 4.5 in) and should be replaced after 7,500 gallons. HGC741700 is for smallBoy/Stealth-RO systems (9.75 in x 2.75 in) and should be replaced after 1,500 gallons when used...

This is the intermittent duty version of the booster pump. It can boost inlet pressure up to 60 PSI. Designed to boost low pressure situations below 40 PSI. This pump is not designed for continuous duty, but rather for shorter run times of a few hours. It has a thermal protective microprocessor that allows the pump to shut down for periods to protect it from overheating. It comes with a heat sink, 1/2 in quick connect fittings and a 115 V plug. Designed to be used with the Merlin Garden Pro or any other system with 1/2 in inlet and 3/8 in outlet.

This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.

Use the HydroLogic Reverse Osmosis (RO) Water Filter Pressure Gauge to customize your indoor hydroponic garden.

This ⅜" Quick Connect (QC) fittings is a pressure regulator for the Stealth-RO or TALLBoy items. It ensures your inlet (source) water pressure does not exceed 85 psi, reducing the risk of pressure related leakage.

#728937: 1/4 in Quick Connect Inline Shut Off Valve. This is used to shut off feed or outlet line to system. This valve is for the Stealth RO system or the Small Boy systems as well as any other 1/4 in systems. #728939: 2 Way Splitter 1/4 in. This is a Y splitter for multiple reservoirs for the Stealth RO system or the Small Boy system as well as any other system that takes 1/4 in tubing.""

Use the 3/8 in 2-way or 3-way splitter to customize your indoor hydroponic garden water purification system. For TallBoy or any other filter system with 3/8 in inlet tubing. This is a Y splitter or 3-way Y splitter for multiple reservoirs. Use the 3/8 in ball valve inline shut-off to customize your indoor hydroponic garden water purification system. This is used to shut off feed or outlet line to system. Use all parts for the Evolution RO1000 and Tall Boy or any other systems with 3/8 in tubing.

Use the Hydro-Logic® reverse osmosis water filter 3/8 in QC X garden hose connector to customize your indoor hydroponic garden water purification system. For Stealth™, Tall Boy™ or any other filter system with 3/8 in inlet tubing.

Use the 3/8 in 2-way or 3-way splitter to customize your indoor hydroponic garden water purification system. For TallBoy or any other filter system with 3/8 in inlet tubing. This is a Y splitter or 3-way Y splitter for multiple reservoirs. Use the 3/8 in ball valve inline shut-off to customize your indoor hydroponic garden water purification system. This is used to shut off feed or outlet line to system. Use all parts for the Evolution RO1000 and Tall Boy or any other systems with 3/8 in tubing.

Our Small Boy™ with the upgraded KDF 85/catalytic carbon filter has it already installed. Removes up to 99% of chlorine, 90% of sediment, rust, silt, etc., and volatile organic compounds and particulates down to 5 microns @ 1 GPM. Easily produces 60 gallons per hour of clear water and has a filter capacity of 6,000 gallons. Includes: 2-stage 10 in filter unit, wall mountable metal bracket, garden hose connector, 4 ft feed line, 6 ft outlet line, 1/4 in shut-off, filter wrench and instructions. Unit size is 12 in x 14 in x 6 in and weight is 8.2 Ib.

Our Stealth RO™ 150 with the upgraded KDF 85/catalytic carbon filter has it already installed. Removes 98%+ of all contaminants in your tap water. Leading the industry in efficiency, the Stealth has a 2:1 waste to product water ratio. Optional 1:1 ratio flow restrictor saves 50% more waste water. Customized for gardening and hydroponics. The Stealth RO™ 150 produces 150 GPD of ultra pure water. Includes: 3-stage RO unit, 1 RO membrane, KDF 85/catalytic carbon filter, cleanable sediment filter, automatic shut-off cartridge, wall mountable metal bracket, garden hose connector, inline shut-off, 8 ft RO and drain line, 5 ft inlet line, filter...

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output