Titan Controls Ares Series LP Replacement Burner

Growers can keep their CO2 units in great shape with the Titan Controls Ares Series Replacement Burners. They make sure that the generator always puts out a steady stream of CO2 and works with both liquid propane (LP) and natural gas (NG) types. The new burners are strong, simple to install, and work just like the old ones.

Installation Guide

It is very simple to change the burner, as you can see from a quick look. A few safety steps at the beginning can keep bad things from happening.

Safety First

• Turn off the gas supply.
• Unplug the generator.
• Allow any residual gas to dissipate in a well-ventilated area.

Step-by-Step Replacement

1. Loosen the fuel line's bolts and pull it away.
2. Check the connections, hose, and regulator. Any that are old or broken should be replaced.
3. Place the burner over the holes, and then tighten the bolts that hold it in place.
4. Making sure it fits tightly, connect the hose to the new burner.
5. Gas and power should be turned on, and there should be a steady blue flame.

Most growers can get this done in less than 15 minutes.

Benefits of Genuine Burners

It is clear that any growing business would benefit from using authorized replacement burners.

• Supply of steady CO2: The generator is kept running at its set point so that plants always have the right amount of CO2 given to them.
• Lower the cost of gas: If you use the right size nozzle, these stoves work very well and use a lot less fuel (NG or LP) over time.
• Keeps the generator safe: The firing system can be strained by a burned burner. Smaller fixes now can help avoid bigger ones later on.

Maintenance Tips

Regular maintenance will keep the burners working efficiently and extend their life.

Monthly Inspections

Growers should check the flame every month. If the tip of the flame is yellow or the flame is uneven, it’s time to clean or replace the burner.

Cleaning the Burner

Blow dust and carbon out of the passages with compressed air. Do not use chemicals that are too abrasive and may ruin the metal.

Off-Season Storage

If the generator will not be running for an extended period of time, remove the burner. Clean it, and then store it in a dry, dust-free spot.

Safety Considerations

Both individuals and equipment are protected when operating in a safe manner.

• Leak Checks - After installation, apply soapy water to the hose and fittings. Bubbles mean a leak so tighten connections until the leak stops.

• Ventilation - Reduced air movement just leads to gas buildup. Set up a CO₂ monitor to monitor the levels inside the grow room.

• Local Rules - For gas, some places demand a licensed technician. Check with the local authorities for zoning, code or permit laws related to commercial growing.

Conclusion

It's easy and quick to change a worn burner with a Titan Controls Ares Series LP or NG replacement burner. Growers get steady CO2 production, lower fuel costs, and an engine that lasts longer. 

Growers can use their CO2 enrichment equipment all year long as long as they follow some simple, commonsense safety rules and keep it in good shape.