Hydroponic Water Pumps

The FloraFlex Barbed T instantly connects multiple hoses. Customize your feed: pick and choose which plants to connect andhow many lines feed each plant. 1/4 inch barbed T fitting for use with 1/4 inch OD Tubing (#760456).

The FloraFlex 3/16 in ID - 1/4 in OD tubing comes in green to color coordinate with the FloraFlex FloraCap's. Comes 100 ft per roll. Designed to be compatible wit the FloraFlex FloraClip.

The FloraFlex 7.5-12 in Universal Round FloraCap is a patent-pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap is designed to give you a more consistent flow rate, even distribution, increased air flow, and stabilization. Fill the cap with water and nutrients by hand or automate with FloraClips. The FloraCap strategically covers the top of the media allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Fits pots from 7.5 to 12 in diameter.

The FloraFlex Air Bleed Valve (3/4 in) can be installed on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line.This product gives you more control over the accuracy of your feedings.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Shut off valve that also allows you to control the pressure of water and nutrients being delivered through the manifold to your plants. Easily snaps into the Flora Pipe Fitting and screws into the Quick Disconnect. Our T and Elbow fittings snap into this unit with no glue required. Connects with ForaFlex GHP to NPT Quick Disconnect, no threading required. Manual off and on action, with easy to use valve handle. Maximum pressure 125 psi. Minimum working temperature 40 F and maximum working temperature 140 F. Made of ABS plastic.

The Multi Flow Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. The Multi Flow Bubbler comes with 4 color-coordinated interchangeable quick loading flow inserts at 2, 6, 10, and 20 GPH so you can find your desired flow rate. 1/2 in inlet which seamlessly screws into our Quick Disconnect without threading. 8 barbed ports that connect to 1/4 in OD Tubing. Rubber grip on top for easy use. Made from ABS plastic.

The Open Flow Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. The Open Flow Bubbler has no pressure regulation and is completely gutted inside to allow maximum pressure while still evenly distributing water. 1/2 in inlet which seamlessly screws into our Quick Disconnect without threading. 8 barbed ports that connect to 1/4 in OD Tubing. Rubber grip on top for easy use. Made from ABS plastic.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

Place the 9 -12 in Round Flood & Drip Shield on top of your plant, and you will instantly have control over your feeding plan. This product is the perfect base tool for a top feeder or someone who enjoys the benefits of a drip system and likes the results of a top feed. Eliminates algae and pesticides by covering the media. Built-in overflow where excess water and nutrients are delivered straight to the root ball. BPA and lead-free rubber. Instantly transforms from a top feed to a top-feeding drip system with the Barbed Insert.

This indoor irrigation and propagation controller operates up to 4 or 6 (depending on model selection) control valves with a master valve or pump start. These are irrigation/propagation controllers suitable for municipal gardening, green houses, nurseries, and large lawns. The easy-to-program LCD screen offers independent programming of each valve with the ability to operate two valves simultaneously. This model includes a sensor input and can designate valve use to use with a soil moisture sensor to conserve water. Features also include (but are not limited to): monthly water budgeting, rain delay, auto restart, identification of short...

This outdoor wall-mounted irrigation and propagation controller operates up to 9 or 12 (depending on model selection) control valves with a master valve or pump start. They come in a UV resistant and water-tight outdoor enclosure. The easy-to-program LCD screen offers independent programming of each valve with the ability to operate two valves simultaneously. This model includes a sensor input and can designate valve use to use with a rain sensor, soil moisture sensor, etc. to conserve water. Features include (but are not limited to): monthly water budgeting, rain delay, auto restart, identification of short circuits in the system, 9V...

The General Hydroponics® Dual Diaphragm air pump is extremely quiet and the only air pump in the world manufactured exclusively for hydroponics systems. This high output pump has four adjustable 1/4 in outputs that can be teed off to power up to twelve air driven hydroponics growing systems such as the WaterFarm. In addition, growers who use our Dual Diaphragm air pump can use it to reliably oxygenate their reservoir with air stones. 3 psi, 320 gph (20 L/min).

The Hydro Flow® Rain Ring® is a great solution for automating your garden. Its versatility allows you to effectively water soil as well as hydroponic growing media, without using small irrigation lines and drip stakes. The Rain Ring® has several strategically positioned distribution holes to fully moisten your grow media. Its heavy duty construction allows them to be used indoors under HID lighting and in full sun outdoor applications. Soak and rinse between cycles for years of trouble free use. Built-in 1/2 in barbed fitting.

The Hydro Flow Rain Ring is a great solution for automating your garden. Its versatility allows you to effectively water soil as well as hydroponic growing media, without using small irrigation lines and drip stakes. The Rain Ring has several strategically positioned distribution holes to fully moisten your grow media. Its heavy duty construction allows them to be used indoors under HID lighting and in full sun outdoor applications. Soak and rinse between cycles for years of trouble free use. Built-in 1/2 in barbed fitting.

The Hydro Flow® Rain Ring® is a great solution for automating your garden. Its versatility allows you to effectively water soil as well as hydroponic growing media, without using small irrigation lines and drip stakes. The Rain Ring® has several strategically positioned distribution holes to fully moisten your grow media. Its heavy duty construction allows them to be used indoors under HID lighting and in full sun outdoor applications. Soak and rinse between cycles for years of trouble free use. Built-in 1/2 in barbed fitting.

Hydro Flow® 6 in holding stake works great for securing tubing between 1/8 in-1/4 in.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight and airtight connection. These fittings offer strength and durability. Use these high quality barbed 1/2 in connectors for your irrigation or hydroponic systems. Each display box contains 250 parts and cannot be shipped in quantities smaller than 250.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provided a secure, watertight and airtight connection. These fittings offer strength and durability. Use these high quality barbed 3/4 in connectors for your irrigation or hydroponic systems.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provided a secure, watertight and airtight connection. These fittings offer strength and durability. Use these high quality barbed 3/4 in connectors for your irrigation or hydroponic systems.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight and airtight connection. These fittings offer strength and durability. Use these high quality barbed 1/2 in connectors for your irrigation or hydroponic systems. Each display box contains 250 parts and cannot be shipped in quantities smaller than 250.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight and airtight connection. These fittings offer strength and durability. Hydro Flow® 3/16 in Connectors are perfect for using with irrigation or hydroponic systems.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provided a secure, watertight and airtight connection. These fittings offer strength and durability. Use these high quality barbed 3/4 in connectors for your irrigation or hydroponic systems.

Hydro Flow Bulk Head fittings are designed to create a water tight seal when transferring liquid from or to a storage container/reservoir. These fittings are made from durable ABS Plastic and come with double gaskets for a secure seal as well as double female threads to incorporate fittings or filters into the bulk head. Manufactured in the U.S.A.

Made with high quality materials. Can be used with dripper line #708345.

Can be used with dripper line #708345.

Can be used with dripper line #708345.

Kit includes: 1 - 1/2 in Tub Outlet Fitting, 1 - 3/4 in Tub Outlet Fitting, 2 - Screen Fittings and 3 - Outlet Extension Fittings. Manufactured using the finest quality materials and craftsmanship. Hydro Flow® Tub Outlet Fittings each come with 2 gaskets ensuring a water tight seal.

Manufactured using high quality materials. Hydro Flow® Tub Outlet Fittings each come with 2 gaskets ensuring a water tight seal. All pieces offered a la carte for maximum flexibility.

Manufactured using high quality materials. Hydro Flow® Tub Outlet Fittings each come with 2 gaskets ensuring a water tight seal. All pieces offered a la carte for maximum flexibility.

Manufactured using high quality materials. Hydro Flow® Tub Outlet Fittings each come with 2 gaskets ensuring a water tight seal. All pieces offered a la carte for maximum flexibility.

Manufactured using high quality materials. Hydro Flow® Tub Outlet Fittings each come with 2 gaskets ensuring a water tight seal. All pieces offered a la carte for maximum flexibility.

Manufactured using high quality materials. Hydro Flow® Tub Outlet Fittings each come with 2 gaskets ensuring a water tight seal. All pieces offered a la carte for maximum flexibility.

Hydro Flow® EZ Flex® PVC Tubing is made of a material that allows the tube to be non-rigid. The flexibility allows this tube to be easily applied to standard barbed drip stakes and push in fittings. It is soft to the touch, yet can make aggressive turns without kinking. Does not contain rubber.

Hydro Flow® single grip hose clamps provide a superior seal on hose or tubing. As interlocking teeth are pushed together, the sealing diameter closes evenly creating a uniform clamping surface. These clamps can be removed by separating the clamping halves in a perpendicular direction at the seal. The black, nylon clamps won't corrode or rust and installation and removal requires no tools.

Hydro Flow® single grip hose clamps provide a superior seal on hose or tubing. As interlocking teeth are pushed together, the sealing diameter closes evenly creating a uniform clamping surface. These clamps can be removed by separating the clamping halves in a perpendicular direction at the seal. The black, nylon clamps won't corrode or rust and installation and removal requires no tools.

Professional quality poly tubing. Carbon black pigment, provides an opaque tubing wall, blocking light from penetrating irrigation water. This durable tubing can be buried or used on the surface for year round water distribution. Made in the U.S.A.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight connection. These fittings offer strength and durability. Hydro Flow® Barbed Ball Valves regulate your hydroponic irrigation systems with a simple turn of the knob.

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight connection. These fittings offer strength and durability. Hydro Flow® Barbed Ball Valves regulate your hydroponic irrigation systems with a simple turn of the knob.