BT MEGATUBE GRABBER-TRAK, P/FT

The BT MegaTube Grabber-Trak is a necessary tool to maintain the tubing straight without any possible kinks. It will fit MegaTube systems with an inside diameter of 0.375 inches. With the help of the product, the users will guarantee that their tubing systems are aligned perfectly and cause no breaks.

Applications

The BT MegaTube Grabber-Trak may be applied to many situations where a tube has to run straight. Some of the most commonly found uses are:

• Heating Systems: Apart from keeping the pipe straight under the cement slab of the heated floor, for instance, the hydronic system also ensures equal distribution of the heat throughout the given space.
• Irrigation Systems: Prevents the tubing from curving under pressure, so the crops receive a regular water supply without being cut off.
• Greenhouses and Agricultural Use: It is used in greenhouses and other uses related to agriculture. Growing plants require a well-functioning tube for proper health and ideal conditions for growth.

Benefits 

There are several advantages to using the Grabber-Trak:

• Keeps Tubing Straight: Grabber-Trak keeps the tubing from kinking or collapsing, so fluid or air can flow through the system.
• Boosts System Efficiency: When tubing is straight and properly aligned, systems work more efficiently typically consuming less energy and resources..
• Reduces the Need for Maintenance: By maintaining the tubing in optimal condition, Grabber-Trak reduces the need for frequent repairs and replacements.
• Saves Money in the Long Run: The short-term cost of purchasing and installing the Grabber-Trak outweighs the long-term maintenance services, reducing the overall cost.

How to Install Grabber-Trak

It is simple to install and takes minimal time, a minute or two, and the systems will work efficiently. Installing the tool involves the following procedure:

1. The tubing system must have an inside diameter of 0.375-inch to be placed for a fitting.
2. Decide the place to put the Grabber-Trak during the initial planning stage, depending on the tubing length, which requires support.
3. Lay the Grabber-Trak down on the pipe, spaced to maintain a consistent gap. Fasten it down so that it keeps the tubing straight.
4. Regular alignment should be done. Ensure the tubing remains to help it work correctly.

Maintenance Tips

Keep the tool in good condition to ensure that it functions correctly. Here are a few tips for maintaining:

• Regular Check of the Grabber-Trak: Ensure to check the condition for any kinks or inappropriate adjustments made.
• Cleaning of the Grabber-Trak and the tubing is essential. Dirt may clog leading to a stoppage in the flow.
• Make any necessary repairs immediately. Any damage can stop the efficiency of the equipment.

Summary

The BT MegaTube Grabber-Trak is an essential tool for any person using the MegaTube system. The role is simple, but it is the most needed to keep the tubing in the straight direction. The tools reduce the need for more repairs or replacements of the equipment. BT MegaTube is a reliable tool to use for all those using the tubing system which is used in heating systems, lawn irrigation, and greenhouses.