HPS & MH Grow Lights

Power Supply Cord, 120v, AWG 14/3

8’ Wieland F 18AWG WT locking 277V, L7-20P, Harness

Analog Light Meter (Footcandles) (6/cs)

Aptus Believer Pack

The SolarSystem controller works only with the California LightWorks SolarSystem 1100, 550, and 275. It can control an unlimited number of lights from a single controller. It allows automated programming for spectrum control, 24-hour timer, and day/week/month calendar. Now it is possible to program an entire grow cycle automatically – varying the spectrum, the length of the day, transitions from veg to bloom, final finishing modes, sunrise/sunset – all in a low cost easy to program digital controller.

The SolarSystem Controller features programmable 0% to 99% spectrum control over three spectrum ranges – Blue, White and Red. You can use the controller in manual mode only to adjust the light spectrum or use the digital clock and calendar to run custom light recipes over a day, week, month or entire season. Programs can be saved for specific crops or strains. You can also use the view mode to work in natural white light and then switch back to high power reds and blues for accelerated growth.

SolarXtreme 1000, 120v

SolarXtreme 250, 240v

SolarXtreme 500, 240v

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The name 420 references the area of the spectrum produced by this lamp. The 420 provides the most crucial spectrum needed during the vegetative cycle. This high UV A spectrum adds nutrient values that are vital to plant growth and sustainability when combined with the FS+UV. This lamp maximizes the initial growth process because it is a true vegetative light.

The Gavita Slim Line 2 (SL2) fixture available in 277/347 volt or 480 volt, includes the HR96 Reflector for maximum efficiency and uniformity, designed specifically with broad light dispersion in mind. This commercial style fixture features highly efficient passive ballast cooling that helps contribute to long fixture life. Other features include sealed housing with a Gore-Tex ventilation plug, and controllable output up to 1150 W. The SL2 is also equipped with a Repeater Bus interface. This double port connection enables control of the SL2 with a Gavita EL Series Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains, giving you room to grow.

The Gavita Slim Line 2 (SL2) fixture features the W150 Reflector, which has a wide spread for optimal uniformity (150 beam angle). This reflector is best suited to overlapping plans. The SL2 features highly ecient passive ballast cooling that helps contribute to long fixture life. Other features include sealed housing with a Gore-Tex ventilation plug, and controllable output up to 1150 W. The SL2 is also equipped with a Repeater Bus interface. This double-port connection enables control of the SL2 with a Gavita EL Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains, giving you room to grow.

An easy to install mounting bracket, designed to fit in multiple orientations on fixtures that allow for fixtures to be pivoted. The Gavita V2 Hanging Bracket will work on all Gavita SL2 and Sun System Pro Sun 2 fixtures.

These 1-5/8 inch bracket assembly kits are used to hang your Gavita fixture on a unistrut or rail system. A single kit includes 1- long bracket, 1- short bracket, 2- M6 bolts, 2- M6 nuts.

These 2 inch bracket assembly kits are used to hang your Gavita fixture on a unistrut or rail system. A single kit includes 1- long bracket, 1- short bracket, 2- M6 bolts, 2- M6 nuts.

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The 3 way cable splitter is needed to connect the Gavita Master Controller to your E-Series ballasts when running ballasts inline. Used with Gavita E-series interconnect cables.

3-way splitter with 6P6C connection jacks. This is a 4 piece kit.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP68 Wieland RST plug. Choose from 3 ft 3 in/1 m, 6 ft 6 in/2 m or 10 ft/3 m in length.

The Gavita Pro 315e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

The Gavita Pro 315e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

The Gavita Pro 630e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

The Gavita Pro 630e SE is available with the Philips 315 watt 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097). These upgraded 10 ft/3 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The revolutionary new Gavita CT 1930e is the first LED that is a direct replacement for HPS. With a footprint designed to fit seamlessly in existing HPS layouts, the CT 1930e is a highly energy efficient LED delivering serious growing power. It’s designed to be a 1:1 layout replacement for the fixture that helped revolutionize the industry nearly three decades ago, the Gavita Pro 1000e DE HPS. Compatibility with wiring and electrical requirements for most indoor growing environments means this compact toplight is able to dramatically limit the cost and downtime required to convert facilities of every size. The CT 1930e delivers more...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100 mol, 1000 watt DE lamp. These fixture are equipped with what we call the Gavita repeater bus. The Gavita repeater bus solution allows you to daisy chain your controller cables from one fixture directly to the other. Each fixture has an input and an output, buffering the signal for the next fixture. This allows us to put 100 fixtures in one daisy chain. On each controller port you can connect 5 chains with 100 fixtures. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment. Customer must select cord and mounting options.

These are packaged bulk for commercial applications. The Gavita housing keeps the electronics cool, significantly reducing the possibility of faults and extending its operating life. In independent tests, the Electronic fixture came out as the coolest. Comes with our HR96 reflector that is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. The Gavita Electronic DE comes with a Gavita Pro Plus 2,100 mol, 1000 watt DE lamp. This professional fixture requires installation by a certified electrician in an industrial environment. 1 year warranty on the lamp.