Master Environmental Control C-1 - Innovative Tool and Design

The Master Environmental Control C-1 offers convenient and efficient management of various environmental parameters within the same greenhouse.

Specifications:

• Input Voltage:
• 120VAC +- 15VAC, 60Hz, 1A (Customizable)
• 220VAC +- 15VAC, 50/60Hz, 1A (Customizable)
• AC Signal Output (Port):
• 10-Channel signal Output: AC24V/0.1A
• Other Signal Output Ports (RJ12):
• RJ12 x 4, 4-Channel RS485 communication
• Signal line output: DC24V, 1.0A
• Network Port: RJ45
• Dimensions: 14" H x 17" W x 4" D (excluding length of power cable)
• Power Cord Length: 2m / 6.5 Ft.
• Net Weight: 9.5 Lbs / 4.30 Kgs
• Gross Weight: 10.5 Lbs / 4.76 Kgs
• Package Size: 24.4x24.4x34.3 in / 620x620x870mm

Accessories:

• Self-tapping screws x4
• Ring Expansion Screws x4
• Temperature and humidity sensor probe x1
• AC Station module x1
• RJ12 network extension connector x1
• RS485 communication extension cable 5.0m x1

Included in the Box:

• CO2 Humidity & Temp Sensor
• Humidity & Temp Sensor
• Gas Detected: CO2
• Working Voltage: DC24V
• Working Current: <10mA
• Humidity Range: 0-100%RH
• Humidity Accuracy: +-2%RH
• Temperature Range: 0-70*C
• Temperature Accuracy: +-0.5*C
• Maximum Quantity: 4 pcs per set
• Communication Mode: RS485 (Modbus-RTU)
• Light Sensor: Photocell
• AC Station Socket Module
• Light Control Module
• Input Voltage: AC110V 60Hz
• Output Voltage: 0-10V(DC)
• Maximum Power: <1100W
• Communication Terminal: RJ12 connector
• Indicator: Green LED
• Max. Connections per Channel: 20 pcs.
• Max. Connections Quantity: 32 Pcs.
• Communication Mode: RS485 (Modbus-RTU)

Basic Configuration:

In a standard working environment with a grow area of 200m3, the following equipment is recommended:

• 1 Master Environmental Control C-1 (Master Controller)
• 1 CO2 4 in 1 sensor (Monitoring CO2 parameters, relative temperature value, relative humidity value, and light parameters)
• 1 Temperature, humidity, and light 3 in 1 sensor (Monitoring relative temperature value, relative humidity value, and light parameters)
• 1 AC Station module (Used to control the CO2 output device - TANK or generator)
• 2 LDA-1 light control modules (Used to control the main light line and auxiliary light line)
• Several RS485 cables (Extension lines for connecting each terminal)

Note:

Before installation, users should consider the number of sensors and related devices based on the actual conditions of the planting area. Heavy-current (110V-380V) devices in the circuits should be installed in the distribution box first.

Connection Guide:

1. Connect the sensor module to the Sensor port in series.
2. Connect the AC Station socket module to the Device port in series.
3. Connect the LDA-1 light control module to the LINE-1 port for the main light control line.
4. Connect the LDA-1 light control module to the LINE-2 port for the auxiliary light control line.
5. Connect the internal 10-channel port to the corresponding configuration in the distribution box or related equipment that supports AC24V signals.
6. Before connecting, check if the positive and negative poles of the output line are correct.
7. After the circuit connection is completed, plug in the power and turn on the device.