Drip Irrigation

Refine search Refine search

In stock
10 days
HGC755004
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.
$5,27728
In stock
10 days
HGC747744
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.
$2376
In stock
10 days
HGC755007
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.
$2485
In stock
10 days
HGC747754
Netafim Series 80 Globe Control Valves are simple to operate and maintain. Reliable even in harsh conditions. Tight sealing valve with fully supported diaphragm. The 3/4 in flow range is 0.01 - 26 gpm and the 1 in is 0.01 - 44 gpm.
$12927
In stock
10 days
HGC747756
Disc Filter technology has grooves in the disc rings that crisscross to form a network that traps debris between and on the outside of the discs. As dirty water is pumped into the filter and pressure increases, the water compresses the disc rings together tightly. The water is then forced to flow through the grooves of the disc rings, where debris is trapped; releasing only clean water to the irrigation system. The Netafim Disc Filters offer a wide selection of flow ranges; 3/4 in filter operates at 1 - 12 GPM; 1 in filter operates at 5 - 26 GPM, 1.5 in super filter operates at 10 - 52 GPM.
$22221
In stock
10 days
HGC747715
Netafim Series 80 Globe Control Valves are simple to operate and maintain. Reliable even in harsh conditions. Tight sealing valve with fully supported diaphragm. The 3/4 in flow range is 0.01 - 26 gpm and the 1 in is 0.01 - 44 gpm.
$3902
In stock
10 days
HGC747757
The Netafim Wide Range Pressure Regulator is the only 1" regulator in the industry that is rated from 0.5 to 35 GPM. High strength ABS construction and stainless steel springs provide long-life and can be used in a variety of applications while the rolling diaphragm and sealed regulating chamber provide consistent, high quality performance in any irrigation system. Operating inlet pressure range: 30 to 150 PSI.
$2886
In stock
10 days
HGC747758
The Netafim Wide Range Pressure Regulator is the only 1" regulator in the industry that is rated from 0.5 to 35 GPM. High strength ABS construction and stainless steel springs provide long-life and can be used in a variety of applications while the rolling diaphragm and sealed regulating chamber provide consistent, high quality performance in any irrigation system. Operating inlet pressure range: 30 to 150 PSI.
$2886
In stock
10 days
HGC747773
The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.
$091
In stock
10 days
HGC755027
The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.
$5,27728
In stock
10 days
HGC747772
The Netafim 17 mm Shut-Off Valve has dual 17 mm barbed tubing connectors designed to fit the 17 mm UV Poly Tubing (HGC747559). These valves are easy to install without clamps, glue or tools and form a tight, leak-proof connection. Use as a flush valve or to shut off a table.
$333
In stock
10 days
HGC747732
The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the Techlock threaded caps and compression rings ensure a tight seal. Operating pressure is 0 to 100 psi.
$133
In stock
10 days
HGC747731
The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.
$187
In stock
10 days
HGC747730
The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.
$234
In stock
10 days
HGC747729
The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.
$116
In stock
10 days
HGC755009
$3412
In stock
10 days
HGC747748
The Netafim Multi-Outlet Dripper assembly allows you to operate multiple drip stake assemblies from one drip emitter. The MOD comes preassembled with a 2-way flat manifold, two 36 in UV Polyethylene Tubing leads and two 6 3/8 in standard Angle Arrow Drippers. Pair the MOD with the Netafim 1 GPH (HGC747708) or 2 GPH (HGC747746) Techflow Emitters.
$5124
In stock
10 days
HGC747749
The Netafim Multi-Outlet Dripper assembly allows you to operate multiple drip stake assemblies from one drip emitter. The MOD comes preassembled with a 2-way flat manifold, two 36 in UV Polyethylene Tubing leads and two 6 3/8 in standard Angle Arrow Drippers. Pair the MOD with the Netafim 1 GPH (HGC747708) or 2 GPH (HGC747746) Techflow Emitters.
$5514
In stock
10 days
HGC747769
Netafim single dripper stake assemblies will reduce setup time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 3.2 or 6.6 GPH pressure compensating emitter with CNL check valve, 36 or 48 inches of Super Flex Tubing. Minimum operating pressure is 22 PSI. Pair the 3.2 GPH assemblies with the Netafim single pattern standard spray stakes (HGC747735) and the 6.6 GPH assemblies with the Netafim single pattern (HGC747736) or double pattern (HGC747737) standard spray stakes.
$2056
In stock
10 days
HGC747768
Netafim single dripper stake assemblies will reduce setup time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 3.2 or 6.6 GPH pressure compensating emitter with CNL check valve, 36 or 48 inches of Super Flex Tubing. Minimum operating pressure is 22 PSI. Pair the 3.2 GPH assemblies with the Netafim single pattern standard spray stakes (HGC747735) and the 6.6 GPH assemblies with the Netafim single pattern (HGC747736) or double pattern (HGC747737) standard spray stakes.
$2199