Drip Irrigation

5 inch transparent container allows the user to check the filter clogging level and, when necessary, replace the cartridge or clean it. 1 inch female-thread couplings with brass inserts and brass blow-off valve. Filter cartridge (part #727994) is not included and must be purchased separately.

The FloraFlex® PotPro™ Pot was strategically designed to allow air flow through the top and bottom of the medium as well as excellent drainage. It securely holds the 6 in FloraCap® allowing anyone to easily transition to the new PotPro™ System. The pot’s built-in stakes and webbed bottom provide a seamless transplant to an alternate medium. Place your 6 in PotPro™ Cube into the pot, hydrate with water, plant your plant, top it with a 6 in FloraCap® and you are ready to hand feed. Advance to automation by attaching (2) FloraClips to your FloraCap® and use FloraTubing to connect your plant to your Quick Disconnect Pipe System Bubbler. Now...

The FloraFlex Barbed T instantly connects multiple hoses. Customize your feed: pick and choose which plants to connect andhow many lines feed each plant. 1/4 inch barbed T fitting for use with 1/4 inch OD Tubing (#760456).

The FloraFlex® Matrix System is a patent-pending first-of-its-kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. It can be used with pots ranging from 7.5-18 in diameters. You will need a Matrix unit, same size Matrix Pad (optional), and the correlating Matrix Circulator. Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Wicking Pad. There are eight slices to the pie, each section is fed the same amount, going through the maze for...

The FloraFlex® Matrix System is a patent-pending first-of-its-kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. It can be used with pots ranging from 7.5-18 in diameters. You will need a Matrix unit, same size Matrix Pad (optional), and the correlating Matrix Circulator. Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Wicking Pad. There are eight slices to the pie, each section is fed the same amount, going through the maze for...

The FloraFlex 3/16 in ID - 1/4 in OD tubing comes in green to color coordinate with the FloraFlex FloraCap's. Comes 100 ft per roll. Designed to be compatible wit the FloraFlex FloraClip.

Allows a rockwool user to seamlessly stack a 4 in cube on top of a 6 in cube or a 6 in cube on top of a 8 in cube—blocking light and eliminating algae, all while allowing in the necessary air a plant needs to thrive.

The FloraFlex 7.5-12 in Universal Round FloraCap is a patent-pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap is designed to give you a more consistent flow rate, even distribution, increased air flow, and stabilization. Fill the cap with water and nutrients by hand or automate with FloraClips. The FloraCap strategically covers the top of the media allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Fits pots from 7.5 to 12 in diameter.

The FloraFlex Air Bleed Valve (3/4 in) can be installed on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line.This product gives you more control over the accuracy of your feedings.

Barbed T Pack of 100

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Shut off valve that also allows you to control the pressure of water and nutrients being delivered through the manifold to your plants. Easily snaps into the Flora Pipe Fitting and screws into the Quick Disconnect. Our T and Elbow fittings snap into this unit with no glue required. Connects with ForaFlex GHP to NPT Quick Disconnect, no threading required. Manual off and on action, with easy to use valve handle. Maximum pressure 125 psi. Minimum working temperature 40 F and maximum working temperature 140 F. Made of ABS plastic.

4” FloraCap® 2.0

6” FloraCap® 2.0

8 inch FloraCap® 2.0

FloraClips 2.0 (12 pack)

Matrix Circulator | 2 1/4” (12 pack)

Matrix Circulator | 3” (12 pack)

10.5" - 12" Matrix Pad (12 pack)

7.5" - 9" Matrix Pad (12 pack)

9 - 10.5" Matrix Pad (12 pack)

10.5”-12” Matrix (12 pack)

12.5”-14.5” Matrix (12 pack)

15.5”-18” Matrix (12 pack)

7.5”-9” Matrix (12 pack)

9”-10.5” Matrix (12 pack)

Multi Flow Bubbler

The Multi Flow Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. The Multi Flow Bubbler comes with 4 color-coordinated interchangeable quick loading flow inserts at 2, 6, 10, and 20 GPH so you can find your desired flow rate. 1/2 in inlet which seamlessly screws into our Quick Disconnect without threading. 8 barbed ports that connect to 1/4 in OD Tubing. Rubber grip on top for easy use. Made from ABS plastic.

The FloraFlex® Multi Flow Conversion Kit allows you to transform your OpenFlow Bubbler into a Multi Flow Bubbler. Insert the three pieces into your OpenFlow Bubbler and then choose from our Flow Inserts, 4 color-coordinated interchangeable quick loading units at 2, 6, 10, and 20 GPH, so you can find your desired flow rate.

Open Flow Bubbler

The Open Flow Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. The Open Flow Bubbler has no pressure regulation and is completely gutted inside to allow maximum pressure while still evenly distributing water. 1/2 in inlet which seamlessly screws into our Quick Disconnect without threading. 8 barbed ports that connect to 1/4 in OD Tubing. Rubber grip on top for easy use. Made from ABS plastic.

Multi Flow Bubbler -1" Elbow

Multi Flow Bubbler - 0.75" Elbow

Multi Flow Bubbler -1" T

Multi Flow Bubbler - 0.75" T

Open Flow Bubbler - 0.75" Elbow

Open Flow Bubbler - 0.75" T

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

GHT to NPT Quick Disconnect Set