Drip Irrigation

The drip irrigation system is a collection of emitters, tubes, and pipes that automatically supply the plant's root zone with the ideal amount of water and nutrients. This method stands out due to its precision and efficiency as only water required to meet soil needs is used, and through evaporation or runoff, water is not wasted.


In growing cannabis, where being precise with watering and feeding enables the grower to have the desired yield and quality, the drip irrigation system is most recommended because of the level of control it gives to the grower, which typical watering methods can't offer.

Drip Tape Irrigation System for Cannabis


Drip irrigation includes a variety of equipment to deliver water with pinpoint accuracy. The drip irrigation systems may vary from the simplest setup with a single line and emitter to complex systems commonly used in commercial applications with different lines, valves, and timers.


Dripping irrigation, a technique that functions on the principle of precision watering, has become an important tool for cannabis growers. Rather than spreading water and nutrients evenly throughout the soil, as with conventional irrigation, drip irrigation places water and nutrients directly into the root zone of the plants, so less water is used, along with fewer labor inputs and less weed competition.


Water and nutrients are directly delivered through a network of tubes and emitters in drip irrigation systems, which are sometimes referred to as trickle irrigation systems. Drip irrigation systems offer a focused and effective approach to deliver water, minimizing waste and lowering the risk of overwatering or under watering, in contrast to conventional watering techniques like hand-watering or sprinkler systems.


In Drip irrigation parts, the heart of the system is the drip emitters, which regulate the flow of water and nutrients to each individual plant. The amount of water these emitters give can be precisely controlled, guaranteeing that every plant gets the right amount of moisture for strong growth.

Dripper Irrigation System


Once irrigation systems are installed, they require minimal maintenance. They can be easily automated with timers and sensors, reducing the need for manual watering and freeing up time for other tasks.


The purchase of a good drip irrigation kit is key for growers of cannabis who try to achieve a successful outcome. The right tools including filters, pressure gauges, and spray heads will guarantee good system performance and solve problems typical of underwater systems like clogging or uneven watering.


A well-designed drip irrigation system using an automatic watering schedule can reduce resource usage as well as time invested in changing the watering patterns. The fertilization process can be managed and supplied with the right equipment that is suitable for their cannabis plants to thrive and produce superior quality buds.


The Growcycle drip irrigation setup offers precise and individualized control over water and nutrient delivery to each plant. This is crucial for successful cannabis cultivation, as it allows for optimal growing conditions tailored to the specific needs of each plant. 


Growcycle drip irrigation kit also has a time-saving feature; through automatic scheduling of watering times, the growers are relieved off unimportant duties, and can focus on other more important aspects of their operations. Moreover, this equipment guarantees an effective operation and helps avoid common problems like clogging, no matter how large the crops, which can cause inadequate performance. Growers can achieve that professional level for their cannabis crops at home and with these setups.


So, choose Growcycle drip irrigation items for a successful and efficient cannabis cultivation journey.  


The Purpose of Drip Irrigation in Cannabis Growing


The key purposes of adopting a drip irrigation system for cannabis cultivation include:

Water Efficiency


Water utilization in drip tape irrigation systems is meant to be extremely efficient. Less water is lost through evaporation when it is delivered straight to the plant's root system. Thus, dripper systems deliver water directly to the plant, minimizing water waste.

Root Zone Precision


Water and nutrients are delivered to the roots where they are most needed to maximize absorption and growth. This precision also helps prevent issues like over- or under watering, which can negatively impact plant health and yield. 

Uniformity


Drip systems can be fine-tuned to ensure that every plant in the system receives the same amount of water and nutrients. By using pressure regulators and emitters, a dripper irrigation system ensures that each plant receives an equal amount of water, preventing issues like dry spots or over-saturation.

Labor Savings

Drip tape irrigation systems are designed to save growers time and labor by automating watering schedules. With timers and sensors, the system can be set up to water at specific intervals or when certain conditions are met. Growers can now focus on other areas of their business since there is no longer an obligation for water hand feeding. So, once set up, drip line irrigation requires less manual labor than traditional watering methods.


Drip Irrigation Parts

Common Components of Drip Irrigation


A typical drip irrigation setup includes several essential components:


Mainline: The primary tubing that transports water from the source to the distribution lines.


Distribution Tubing: Smaller diameter tubing that extends from the mainline to the plants, often referred to as the 'drip line irrigation.'


Valves and Fittings: Used to control the flow of water within the system.


Pressure Regulators: Ensure that the water pressure is suited to the specific needs of a drip system. It is often lower than that used for other irrigation methods.


Filters: Prevent clogging by debris and sediment often found in water sources.


Emitters/Drippers: Devices that regulate water flow from the distribution tubing to the soil, releasing water in controlled bursts or a steady drip.


Typical Problems with Drip Irrigation Systems and Their Solutions


Despite its benefits, drip irrigation presents its own set of challenges. Here are a few of the most common issues cannabis growers may encounter and how to overcome them:

Clogging


Drip irrigation parts may, however, clog due to unfiltered water or where the system is not properly maintained. Filtering media must be cleaned periodically; otherwise, regular flushing of water lines is needed, and clogging will become frequent. Water should be treated according to the type used in order to avoid blocking the water system.

System Leaks


Incorrectly installed fittings or damage to the tube can reduce efficiency. Water distribution will be affected, and plant health may break down. Conduct detailed checks for leaks when installing the system and periodically after installation. It is important to invest in durable tubing and fittings to avoid cracking or bursting.

Uneven Watering


If plants on one end of the system receive more water than those on the other, the system's design or performance is at fault. To guarantee that every plant is receiving the same amount of water, check and adjust the system on a regular basis.

Overwatering


An incorrectly programmed timer or a malfunctioning pressure regulator can lead to overwatering. To make sure they are giving cannabis plants the proper amount of water, cultivators need to confirm the system's performance and settings.


The Bottom Line


In the final words, drip irrigation is obviously one of the most capable and successful methods for growing marijuana. The system can accurately and uniquely water the individual plants, which in turn saves time and resources, thus the plants grow better and in turn produce more yields. By allowing self-automation of the watering schedule and including the necessary nutrients for the plants, drip irrigation enables a more organized and overall efficient grow operation.


However, even when they have some difficulties, these can be readily fixed or detected by carrying out a regular maintenance and inspection. Get the best drip irrigation online from the Growcycle store for the best results. Apply drip irrigation to crop cultivation right now and participate in this remarkable and ecological method of cannabis cultivation.

Refine search Refine search

EcoPlus Eco 185 Fixed Flow Submersible/Inline Pump 158 GPH (12/Cs)
Save up to 8%
In stock
10 days
HGC728300
EcoPlus® Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.
$1331 $1452
EcoPlus Eco 2245 Fixed Flow Submersible/Inline Pump 2166 GPH (4/Cs)
Save up to 8%
In stock
10 days
HGC728333
EcoPlus® Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.
$13581 $14815
EcoPlus Eco 264 Fixed Flow Submersible/Inline Pump 290 GPH (18/Cs)
Save up to 8%
In stock
10 days
HGC728305
EcoPlus® Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.
$2060 $2248
EcoPlus Eco 396 Fixed Flow Submersible/Inline Pump 396 GPH (24/Cs)
Save up to 8%
In stock
10 days
HGC728310
EcoPlus® Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.
$2456 $2680
EcoPlus Eco 4950 Fixed Flow Submersible/Inline Pump 4750 GPH (2/Cs)
Save up to 8%
In stock
10 days
HGC728485
EcoPlus® Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.
$18831 $20543
EcoPlus Eco 633 Fixed Flow Submersible/Inline Pump 594 GPH (12/Cs)
Save up to 8%
In stock
10 days
HGC728315
EcoPlus® Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.
$4489 $4897
In stock
10 days
HGC728490
The EcoPlus Bottom Draw Pumps are driven by a high powered magnetic rotor and oil-free motor which works great for small hydroponic systems, aquariums and fountains. The bottom draw feature allows you to lower your reservoir tank to a minimum by drawing the water from the bottom instead of the side. The pumps have a built-in flow regulator allowing full adjustability of your water movement. One moving part allows for trouble-free quiet operation. Comes with 3 additional fittings.
$1323
EcoPlus Elite Series Automatic Submersible Pump 1/4 HP - 3168 GPH
Save up to 8%
In stock
10 days
HGC727186
EcoPlus® Elite Series Automatic Submersible Pumps are specifically designed for uses in narrow pits or reservoirs. These pumps can fit in spaces of 8 in x 8 in. Suitable to pump clear water containing particles with maximum diameter up to 1/4 in. Built with anti-corrosive and rust-proof materials. These pumps have low suction capability down to a 1/16 in. They include an integrated float switch which automatically shuts your pump off so it doesn’t run dry. Pumps have 32.8 ft power cord.
$21007 $22916
EcoPlus Elite Series Automatic Submersible Pump 1/5 HP - 1746 GPH
Save up to 8%
In stock
10 days
HGC727184
EcoPlus® Elite Series Automatic Submersible Pumps are specifically designed for uses in narrow pits or reservoirs. These pumps can fit in spaces of 8 in x 8 in. Suitable to pump clear water containing particles with maximum diameter up to 1/4 in. Built with anti-corrosive and rust-proof materials. These pumps have low suction capability down to a 1/16 in. They include an integrated float switch which automatically shuts your pump off so it doesn’t run dry. Pumps have 32.8 ft power cord.
$17879 $19505
EcoPlus Elite Series Electronic Jet Pump 3/4 HP - 900 GPH
Save up to 8%
In stock
10 days
HGC727194
The EcoPlus® Elite Series Electronic Jet Pump is perfect for supplying water to domestic, irrigation, and gardening applications. This pump has 1 impeller, which helps deliver high flow and pressure. The high flow and pressure makes this pump ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. This pump has an electrical safety device built-in to prevent the pump from running dry. It also allows for automatic operation to start or close when faucet is turned on or off. Self-priming, compact, and robust construction. Built-in pre-filter. Outlet and inlets are 1 in NPT.
$46646 $50886
In stock
10 days
HGC727196
The EcoPlus Elite Series Electronic Multistage Pump is perfect for supplying water to domestic, irrigation, and gardening applications. This pump has 3 impellers, which help deliver high flow and pressure. The high flow and pressure makes this pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. This pump has an electrical safety device built-in to prevent the pump from running dry. It also allows for automatic operation to start or close when faucet is turned on or off. Self-priming, compact, and robust construction. Built-in pre-filter. Outlet and inlets are 1 in NPT.
$50948
EcoPlus Elite Series Jet Pump 1/3 HP - 708 GPH
Save up to 8%
In stock
10 days
HGC727188
The EcoPlus® Elite series Jet Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 1 impeller, which helps deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. Self-priming, compact, and robust construction. Comes with a built-in pre-filter. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.
$22796 $24869
EcoPlus Elite Series Jet Pump 3/4 HP - 900 GPH
Save up to 8%
In stock
10 days
HGC727190
The EcoPlus® Elite series Jet Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 1 impeller, which helps deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. Self-priming, compact, and robust construction. Comes with a built-in pre-filter. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.
$29209 $31865
EcoPlus Elite Series Multistage Pump 1/2 HP - 924 GPH
Save up to 8%
In stock
10 days
HGC727180
The EcoPlus® Elite series Multistage Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 3 impellers which help deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. This pump is very quiet and runs from a manual on/off switch. Self-priming, compact, and robust construction. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.
$27948 $30488
In stock
10 days
HGC727182
The EcoPlus Elite series Multistage Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 3 impellers which help deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. This pump is very quiet and runs from a manual on/off switch. Self-priming, compact, and robust construction. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.
$31264
EcoPlus Elite Series Utility Submersible Pump 1/12 HP - 1530 GH
Save up to 8%
In stock
10 days
HGC727192
EcoPlus® Elite Series Utility Submersible Pump is a multipurpose submersible pump designed to circulate water in all types of tanks, reservoirs, hydroponic, and aquaponic systems. Suitable to pump clear water containing particles with diameter up to 0.20 in. Other features include wear resistant shaft and impeller. Made of anti-corrosive and rust-proof materials. Motor with thermal overload protection, supplied with power cable with plug, and a self-sealing fitting. 32 ft power cord.
$12066 $13163
EcoPlus Pump Filter Bag Large - 10 in x 12.5 in
Save up to 8%
In stock
10 days
HGC728190
A submersible pump is inserted into this filter bag to prevent sediment from clogging it. Use of the filter bag will prolong the life and reduce cleaning/maintenance of the pump. A must have for every pump! Small Filter Bag works with the following pumps: Eco 66, Eco 100 and Eco 132. Large Filter Bag works with the following pumps: Eco 185, Eco 264, Eco 396, Eco 633, Mag Drive 250 & 350, Little Giant PE-1, LG 1, NK-1 and NK-2.
$932 $1016
In stock
10 days
HGC709196
The Dilution Solutions Etatron eOne Micro-Doser Kit can accurately inject super-concentrated products, and can be integrated into an existing fertigation system. This kit can work in combination with a Dosatron Water-Powered Nutrient Delivery System, or as a stand-alone solution to provide the ultimate in reliability and functionality in one system. The kit comes with water meter and pressure relief valve.
$1,95152
In stock
10 days
HGC709194
The Dilution Solutions Etatron eOne Micro-Doser Kit can accurately inject super-concentrated products, and can be integrated into an existing fertigation system. This kit can work in combination with a Dosatron Water-Powered Nutrient Delivery System, or as a stand-alone solution to provide the ultimate in reliability and functionality in one system. The kit comes with water meter and pressure relief valve.
$1,53190
Etatron eOne Micro-Dosing Pump 1.5 in - Assembled Panel (Left to Right)
Save up to 24%
In stock
10 days
HGC709173
The eOne MF is a multifunction microprocessor dosing pump, suitable for applications which require proportional dosing. The pump operates at a dosing frequency up to 180 impulses/minute, and is equipped with backlit graphic display for correct setting of the various programming parameters. It has a flow rate of 0.26 gph and a max pressure of 1.45 psi. Included eOne MF 0110 pump, polyethylene panel, PVC suction tube, PVC priming discharge tube, polyethylene discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter and mixing chamber. Choose the size and orientation that works best for your set up.
$1,61180 $2,13469
In stock
10 days
RPP461016
$16170
In stock
10 days
EZCSPJ
EZ Clone 360 Replacement Mister, pack of 50
$2089
In stock
10 days
EZWP750
EZ Clone Water Pump 700
$5242
In stock
10 days
HGC727992
5 inch transparent container allows the user to check the filter clogging level and, when necessary, replace the cartridge or clean it. 1 inch female-thread couplings with brass inserts and brass blow-off valve. Filter cartridge (part #727994) is not included and must be purchased separately.
$3190
In stock
10 days
HGC760546
The FloraFlex® PotPro™ Pot was strategically designed to allow air flow through the top and bottom of the medium as well as excellent drainage. It securely holds the 6 in FloraCap® allowing anyone to easily transition to the new PotPro™ System. The pot’s built-in stakes and webbed bottom provide a seamless transplant to an alternate medium. Place your 6 in PotPro™ Cube into the pot, hydrate with water, plant your plant, top it with a 6 in FloraCap® and you are ready to hand feed. Advance to automation by attaching (2) FloraClips to your FloraCap® and use FloraTubing to connect your plant to your Quick Disconnect Pipe System Bubbler. Now...
$184
In stock
10 days
HGC760462
The FloraFlex Barbed T instantly connects multiple hoses. Customize your feed: pick and choose which plants to connect andhow many lines feed each plant. 1/4 inch barbed T fitting for use with 1/4 inch OD Tubing (#760456).
$1524
In stock
10 days
HGC760515
The FloraFlex® Matrix System is a patent-pending first-of-its-kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. It can be used with pots ranging from 7.5-18 in diameters. You will need a Matrix unit, same size Matrix Pad (optional), and the correlating Matrix Circulator. Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Wicking Pad. There are eight slices to the pie, each section is fed the same amount, going through the maze for...
$2050
In stock
10 days
HGC760516
The FloraFlex® Matrix System is a patent-pending first-of-its-kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. It can be used with pots ranging from 7.5-18 in diameters. You will need a Matrix unit, same size Matrix Pad (optional), and the correlating Matrix Circulator. Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Wicking Pad. There are eight slices to the pie, each section is fed the same amount, going through the maze for...
$3238
In stock
10 days
HGC760456
The FloraFlex 3/16 in ID - 1/4 in OD tubing comes in green to color coordinate with the FloraFlex FloraCap's. Comes 100 ft per roll. Designed to be compatible wit the FloraFlex FloraClip.
$1999
In stock
10 days
HGC760460
Allows a rockwool user to seamlessly stack a 4 in cube on top of a 6 in cube or a 6 in cube on top of a 8 in cube—blocking light and eliminating algae, all while allowing in the necessary air a plant needs to thrive.
$079
In stock
10 days
HGC760528
The FloraFlex 7.5-12 in Universal Round FloraCap is a patent-pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap is designed to give you a more consistent flow rate, even distribution, increased air flow, and stabilization. Fill the cap with water and nutrients by hand or automate with FloraClips. The FloraCap strategically covers the top of the media allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Fits pots from 7.5 to 12 in diameter.
$1232
In stock
10 days
HGC760530
The FloraFlex Air Bleed Valve (3/4 in) can be installed on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line.This product gives you more control over the accuracy of your feedings.
$5154