Drip Irrigation

Permanently lubricated utility pump includes garden hose adapter and removable inlet screen for easy cleaning. Lifetime oil supply. Pumps down to 1/8 in (3.2 mm). 1/6 HP thermally protected, shaded pole motor. Epoxy-coated cast aluminum housing. Bottom inlet has removable screen for easy cleaning. Manufacturer Item No. 505000.

Permanently lubricated utility pump includes garden hose adapter and removable inlet screen for easy cleaning. Lifetime oil supply. Pumps down to 1/8 in (3.2 mm). 1/6 HP thermally protected, shaded pole motor. Epoxy-coated cast aluminum housing. Bottom inlet has removable screen for easy cleaning. Manufacturer Item No. 505000.

Piggyback Diaphragm Switch

The RS-5LL switch can be used anytime you have a basin usage for the pump. It works by diaphragm. If the water reaches a certain level, it will shut off the pump. The pump plugs into the switch. On level: 2 in - 3 in Off level: 0.5 in - 1.5 in when mounted to 5-MSP. For pumps up through 1/3 HP or the following pumps, 5-MSP, 6-CIM-R, NK-1 & NK-2. 18 ft cord. One year limited warranty.

Energy-efficient Maxi-Jet Pumps are very durable. With a sealed casing and superior internal design, it ensures that they won't overheat when ran dry, unlike most other pumps. They feature 3-suction cup mounting to ensure that the pump is stable in your reservoir. Equipped with dual pre-filters and a simplistic design, making the Maxi-Jet pumps virtually maintenance free and long lasting.

The Measure Master® Graduated Cylinders are a version that differ from traditional graduated cylinders you are used to seeing because these are a little bit wider and shorter. With this construction the wider base provides more stability and easier adding or pouring of liquids. The reduction in height allows for easier storing. Unlike most graduated cylinders, which read metric measurements only, these include metric milliliters, ounces and cups. Each cylinder is translucent for easy viewing of liquid levels. Imprinted on these cylinders are a raised scale and numerals for easy reading. The 250 ml units measure in 5 ml increments, 500 ml...

A heavy duty, oilless (water cooled) multipurpose pump suitable for water control: basement/indoor flooding, plant watering, water recirculation and more! Outfitted with a 1/2 HP motor that can pump up to 1585 gallons per hour. Constructed with an ultra durable casing that stands up to tough conditions. Faceted with an extra long 20ft grounded cord. Equipped with 2 hose fittings; a multi-sized hose fitting for industrial hoses and one for a garden hose.

Netafim Single dripper stake assemblies will reduce set up time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 0.3 or 0.5 gph pressure compensating emitter with CNL check vale, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi.

Netafim Single dripper stake assemblies will reduce set up time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 0.3 or 0.5 gph pressure compensating emitter with CNL check vale, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi.

Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.

Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.

Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.

Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.

Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.

Netafim Series 80 Globe Control Valves are simple to operate and maintain. Reliable even in harsh conditions. Tight sealing valve with fully supported diaphragm. The 3/4 in flow range is 0.01 - 26 gpm and the 1 in is 0.01 - 44 gpm.

Disc Filter technology has grooves in the disc rings that crisscross to form a network that traps debris between and on the outside of the discs. As dirty water is pumped into the filter and pressure increases, the water compresses the disc rings together tightly. The water is then forced to flow through the grooves of the disc rings, where debris is trapped; releasing only clean water to the irrigation system. The Netafim Disc Filters offer a wide selection of flow ranges; 3/4 in filter operates at 1 - 12 GPM; 1 in filter operates at 5 - 26 GPM, 1.5 in super filter operates at 10 - 52 GPM.

Netafim Series 80 Globe Control Valves are simple to operate and maintain. Reliable even in harsh conditions. Tight sealing valve with fully supported diaphragm. The 3/4 in flow range is 0.01 - 26 gpm and the 1 in is 0.01 - 44 gpm.

The Netafim Wide Range Pressure Regulator is the only 1" regulator in the industry that is rated from 0.5 to 35 GPM. High strength ABS construction and stainless steel springs provide long-life and can be used in a variety of applications while the rolling diaphragm and sealed regulating chamber provide consistent, high quality performance in any irrigation system. Operating inlet pressure range: 30 to 150 PSI.

The Netafim Wide Range Pressure Regulator is the only 1" regulator in the industry that is rated from 0.5 to 35 GPM. High strength ABS construction and stainless steel springs provide long-life and can be used in a variety of applications while the rolling diaphragm and sealed regulating chamber provide consistent, high quality performance in any irrigation system. Operating inlet pressure range: 30 to 150 PSI.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

The Netafim 17 mm Shut-Off Valve has dual 17 mm barbed tubing connectors designed to fit the 17 mm UV Poly Tubing (HGC747559). These valves are easy to install without clamps, glue or tools and form a tight, leak-proof connection. Use as a flush valve or to shut off a table.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the Techlock threaded caps and compression rings ensure a tight seal. Operating pressure is 0 to 100 psi.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

The Netafim Multi-Outlet Dripper assembly allows you to operate multiple drip stake assemblies from one drip emitter. The MOD comes preassembled with a 2-way flat manifold, two 36 in UV Polyethylene Tubing leads and two 6 3/8 in standard Angle Arrow Drippers. Pair the MOD with the Netafim 1 GPH (HGC747708) or 2 GPH (HGC747746) Techflow Emitters.

The Netafim Multi-Outlet Dripper assembly allows you to operate multiple drip stake assemblies from one drip emitter. The MOD comes preassembled with a 2-way flat manifold, two 36 in UV Polyethylene Tubing leads and two 6 3/8 in standard Angle Arrow Drippers. Pair the MOD with the Netafim 1 GPH (HGC747708) or 2 GPH (HGC747746) Techflow Emitters.

Netafim single dripper stake assemblies will reduce setup time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 3.2 or 6.6 GPH pressure compensating emitter with CNL check valve, 36 or 48 inches of Super Flex Tubing. Minimum operating pressure is 22 PSI. Pair the 3.2 GPH assemblies with the Netafim single pattern standard spray stakes (HGC747735) and the 6.6 GPH assemblies with the Netafim single pattern (HGC747736) or double pattern (HGC747737) standard spray stakes.

Netafim single dripper stake assemblies will reduce setup time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 3.2 or 6.6 GPH pressure compensating emitter with CNL check valve, 36 or 48 inches of Super Flex Tubing. Minimum operating pressure is 22 PSI. Pair the 3.2 GPH assemblies with the Netafim single pattern standard spray stakes (HGC747735) and the 6.6 GPH assemblies with the Netafim single pattern (HGC747736) or double pattern (HGC747737) standard spray stakes.

Netafim Series 80 Globe Control Valves are simple to operate and maintain. Reliable even in harsh conditions. Tight sealing valve with fully supported diaphragm. The 3/4 in flow range is 0.01 - 26 gpm and the 1 in is 0.01 - 44 gpm.

The Netafim Medium Flow Pressure Regulator will instantly respond to variations in pressure assuring the 35 PSI outlet pressure will remain constant regardless of inlet pressure. Non-corrosive, high quality plastic bodies withstand commonly used fertilizers and chemicals. This sealed regulating unit uses a stainless steel spring and screw that are field replaceable and easy to maintain. Maximum Operating Pressure: 145 PSI.

The Netafim Medium Flow Pressure Regulator will instantly respond to variations in pressure assuring the 35 PSI outlet pressure will remain constant regardless of inlet pressure. Non-corrosive, high quality plastic bodies withstand commonly used fertilizers and chemicals. This sealed regulating unit uses a stainless steel spring and screw that are field replaceable and easy to maintain. Maximum Operating Pressure: 145 PSI.

Netafim 4 way dripper stake assemblies will make installation a breeze. Dripper stake assembly comes with 4 way fitting, 36 or 48 inch lengths of Super Flex UV protected PE tubing and angled barbed stakes all preassembled. Sold in bundles of 25.

Netafim 4 way dripper stake assemblies will make installation a breeze. Dripper stake assembly comes with 4 way fitting, 36 or 48 inch lengths of Super Flex UV protected PE tubing and angled barbed stakes all preassembled. Sold in bundles of 25.

Netafim 5 mm connectors are designed to make the connection between your poly distribution line and your 5 mm UV Super Flex polyethylene (HGC747561) feed line. Thread the connector into your 5 mm tubing, place a hole in your distribution line using a hole-punch and insert the barbed end of the connector. Now you are ready to choose your Netafim Drip or Spray stakes for your preferred method of water delivery.

Netafim single dripper stake assemblies will reduce setup time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 3.2 or 6.6 GPH pressure compensating emitter with CNL check valve, 36 or 48 inches of Super Flex Tubing. Minimum operating pressure is 22 PSI. Pair the 3.2 GPH assemblies with the Netafim single pattern standard spray stakes (HGC747735) and the 6.6 GPH assemblies with the Netafim single pattern (HGC747736) or double pattern (HGC747737) standard spray stakes.

Netafim single dripper stake assemblies will reduce setup time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 3.2 or 6.6 GPH pressure compensating emitter with CNL check valve, 36 or 48 inches of Super Flex Tubing. Minimum operating pressure is 22 PSI. Pair the 3.2 GPH assemblies with the Netafim single pattern standard spray stakes (HGC747735) and the 6.6 GPH assemblies with the Netafim single pattern (HGC747736) or double pattern (HGC747737) standard spray stakes.