Hydroponic Water Pumps

The EcoPlus Elite Series Electronic Multistage Pump is perfect for supplying water to domestic, irrigation, and gardening applications. This pump has 3 impellers, which help deliver high flow and pressure. The high flow and pressure makes this pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. This pump has an electrical safety device built-in to prevent the pump from running dry. It also allows for automatic operation to start or close when faucet is turned on or off. Self-priming, compact, and robust construction. Built-in pre-filter. Outlet and inlets are 1 in NPT.

The EcoPlus® Elite series Jet Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 1 impeller, which helps deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. Self-priming, compact, and robust construction. Comes with a built-in pre-filter. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.

The EcoPlus® Elite series Jet Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 1 impeller, which helps deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. Self-priming, compact, and robust construction. Comes with a built-in pre-filter. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.

The EcoPlus® Elite series Multistage Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 3 impellers which help deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. This pump is very quiet and runs from a manual on/off switch. Self-priming, compact, and robust construction. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.

The EcoPlus Elite series Multistage Pumps are perfect for supplying water to domestic, irrigation, and gardening applications. These pumps have 3 impellers which help deliver high flow and pressure. The high flow and pressure makes these pumps ideal for use with many drip emitters, and other irrigation equipment that require a high PSI to operate. This pump is very quiet and runs from a manual on/off switch. Self-priming, compact, and robust construction. Outlet and inlets are 1 in NPT. Pumps have 5 ft power cord.

EcoPlus® Elite Series Utility Submersible Pump is a multipurpose submersible pump designed to circulate water in all types of tanks, reservoirs, hydroponic, and aquaponic systems. Suitable to pump clear water containing particles with diameter up to 0.20 in. Other features include wear resistant shaft and impeller. Made of anti-corrosive and rust-proof materials. Motor with thermal overload protection, supplied with power cable with plug, and a self-sealing fitting. 32 ft power cord.

EcoPlus® Hydrovescent Air Disc® air diffusers are great for aerating or circulating nutrients in your tanks or reservoirs. These air diffusers incorporate suction cup feet to keep your Hydrovescent Air Disc® secured without fear of it moving around or flipping. The 3 air diffusers have a built-in 3/8 in 90 degree elbow fitting that insures the air line connects freely to your fitting and prevents the air line from kinking at the base of the fitting. Air diffusers are great for use with EcoPlus® or Air Force Pro® Air Pumps. Comes in three different sizes 4 in, 6 in, and 8 in. Use with Hydro Flow® Tubing #708227.

EcoPlus® Hydrovescent Air Disc® air diffusers are great for aerating or circulating nutrients in your tanks or reservoirs. These air diffusers incorporate suction cup feet to keep your Hydrovescent Air Disc® secured without fear of it moving around or flipping. The 3 air diffusers have a built-in 3/8 in 90 degree elbow fitting that insures the air line connects freely to your fitting and prevents the air line from kinking at the base of the fitting. Air diffusers are great for use with EcoPlus® or Air Force Pro® Air Pumps. Comes in three different sizes 4 in, 6 in, and 8 in. Use with Hydro Flow® Tubing #708227.

EcoPlus® Hydrovescent Air Disc® air diffusers are great for aerating or circulating nutrients in your tanks or reservoirs. These air diffusers incorporate suction cup feet to keep your Hydrovescent Air Disc® secured without fear of it moving around or flipping. The 3 air diffusers have a built-in 3/8 in 90 degree elbow fitting that insures the air line connects freely to your fitting and prevents the air line from kinking at the base of the fitting. Air diffusers are great for use with EcoPlus® or Air Force Pro® Air Pumps. Comes in three different sizes 4 in, 6 in, and 8 in. Use with Hydro Flow® Tubing #708227.

These great quality Air Stones aerate and add oxygen to the water in your reservoir or grow system. Circulates nutrients into the water and helps to maintain an even water temperature. Use with 3/16 in ID air line product #708215.

These great quality Air Stones aerate and add oxygen to the water in your reservoir or grow system. Circulates nutrients into the water and helps to maintain an even water temperature. Use with 3/16 in ID air line product #708215.

EcoPlus® Pro Linear Air Pumps are commonly used to provide oxygen in aquariums, fish farms, hydroponic systems and more. These air pumps are designed to minimize noise, heat and vibration in environments where aeration is needed. This product requires minimal maintenance and is oilless; no need for lubrication. Each pump comes with a metal barbed outflow fitting, metal air manifold and tubing with two hose clamps. Can be used with EcoPlus® Trumpet Style Air Manifold. Includes two metal fittings, tubing, two metal clamps and manifold.

EcoPlus Pro Linear Air Pumps are commonly used to provide oxygen in aquariums, fish farms, hydroponic systems and more. These air pumps are designed to minimize noise, heat and vibration in environments where aeration is needed. This product requires minimal maintenance and is oilless; no need for lubrication. Each pump comes with a metal barbed outflow fitting, metal air manifold and tubing with two hose clamps. Can be used with EcoPlus Trumpet Style Air Manifold. Includes two metal fittings, tubing, two metal clamps and manifold.

EcoPlus® Pro Linear Air Pumps are commonly used to provide oxygen in aquariums, fish farms, hydroponic systems and more. These air pumps are designed to minimize noise, heat and vibration in environments where aeration is needed. This product requires minimal maintenance and is oilless; no need for lubrication. Each pump comes with a metal barbed outflow fitting, metal air manifold and tubing with two hose clamps. Can be used with EcoPlus® Trumpet Style Air Manifold. Includes two metal fittings, tubing, two metal clamps and manifold.

A submersible pump is inserted into this filter bag to prevent sediment from clogging it. Use of the filter bag will prolong the life and reduce cleaning/maintenance of the pump. A must have for every pump! Small Filter Bag works with the following pumps: Eco 66, Eco 100 and Eco 132. Large Filter Bag works with the following pumps: Eco 185, Eco 264, Eco 396, Eco 633, Mag Drive 250 & 350, Little Giant PE-1, LG 1, NK-1 and NK-2.

These great quality Air Stones aerate and add oxygen to the water in your reservoir or grow system. Circulates nutrients into the water and helps to maintain an even water temperature. Use with 3/16 in ID air line product #708215.

The Dilution Solutions Etatron eOne Micro-Doser Kit can accurately inject super-concentrated products, and can be integrated into an existing fertigation system. This kit can work in combination with a Dosatron Water-Powered Nutrient Delivery System, or as a stand-alone solution to provide the ultimate in reliability and functionality in one system. The kit comes with water meter and pressure relief valve.

The Dilution Solutions Etatron eOne Micro-Doser Kit can accurately inject super-concentrated products, and can be integrated into an existing fertigation system. This kit can work in combination with a Dosatron Water-Powered Nutrient Delivery System, or as a stand-alone solution to provide the ultimate in reliability and functionality in one system. The kit comes with water meter and pressure relief valve.

The eOne MF is a multifunction microprocessor dosing pump, suitable for applications which require proportional dosing. The pump operates at a dosing frequency up to 180 impulses/minute, and is equipped with backlit graphic display for correct setting of the various programming parameters. It has a flow rate of 0.26 gph and a max pressure of 1.45 psi. Included eOne MF 0110 pump, polyethylene panel, PVC suction tube, PVC priming discharge tube, polyethylene discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter and mixing chamber. Choose the size and orientation that works best for your set up.

EZ Clone 360 Replacement Mister, pack of 50

EZ Clone Water Pump 1125

EZ Clone Water Pump 700

Water Pump 925, 800 GPH

Water Pump 450 320 GPH

Replacement sprayer for all models of EZ-Clone units.

5 inch transparent container allows the user to check the filter clogging level and, when necessary, replace the cartridge or clean it. 1 inch female-thread couplings with brass inserts and brass blow-off valve. Filter cartridge (part #727994) is not included and must be purchased separately.

The FloraFlex Barbed T instantly connects multiple hoses. Customize your feed: pick and choose which plants to connect andhow many lines feed each plant. 1/4 inch barbed T fitting for use with 1/4 inch OD Tubing (#760456).

The FloraFlex 3/16 in ID - 1/4 in OD tubing comes in green to color coordinate with the FloraFlex FloraCap's. Comes 100 ft per roll. Designed to be compatible wit the FloraFlex FloraClip.

The FloraFlex 7.5-12 in Universal Round FloraCap is a patent-pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap is designed to give you a more consistent flow rate, even distribution, increased air flow, and stabilization. Fill the cap with water and nutrients by hand or automate with FloraClips. The FloraCap strategically covers the top of the media allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Fits pots from 7.5 to 12 in diameter.

The FloraFlex Air Bleed Valve (3/4 in) can be installed on any mainline to prevent air locks. When water starts to flow, air is forced out of the Air Bleed Valve. When water hits the valve, the valve closes and water flows freely through the line.This product gives you more control over the accuracy of your feedings.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Quick loading comes in 2, 6, 10, and 20 GPH and allows you to deliver water to your plants at a flow rate of 2, 6, 10, and 20 gallons per hour. Each is color coded for easy recognition.

Shut off valve that also allows you to control the pressure of water and nutrients being delivered through the manifold to your plants. Easily snaps into the Flora Pipe Fitting and screws into the Quick Disconnect. Our T and Elbow fittings snap into this unit with no glue required. Connects with ForaFlex GHP to NPT Quick Disconnect, no threading required. Manual off and on action, with easy to use valve handle. Maximum pressure 125 psi. Minimum working temperature 40 F and maximum working temperature 140 F. Made of ABS plastic.

The Multi Flow Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. The Multi Flow Bubbler comes with 4 color-coordinated interchangeable quick loading flow inserts at 2, 6, 10, and 20 GPH so you can find your desired flow rate. 1/2 in inlet which seamlessly screws into our Quick Disconnect without threading. 8 barbed ports that connect to 1/4 in OD Tubing. Rubber grip on top for easy use. Made from ABS plastic.

The Open Flow Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. The Open Flow Bubbler has no pressure regulation and is completely gutted inside to allow maximum pressure while still evenly distributing water. 1/2 in inlet which seamlessly screws into our Quick Disconnect without threading. 8 barbed ports that connect to 1/4 in OD Tubing. Rubber grip on top for easy use. Made from ABS plastic.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Open Flow Bubbler.

Place the 9 -12 in Round Flood & Drip Shield on top of your plant, and you will instantly have control over your feeding plan. This product is the perfect base tool for a top feeder or someone who enjoys the benefits of a drip system and likes the results of a top feed. Eliminates algae and pesticides by covering the media. Built-in overflow where excess water and nutrients are delivered straight to the root ball. BPA and lead-free rubber. Instantly transforms from a top feed to a top-feeding drip system with the Barbed Insert.

This indoor irrigation and propagation controller operates up to 4 or 6 (depending on model selection) control valves with a master valve or pump start. These are irrigation/propagation controllers suitable for municipal gardening, green houses, nurseries, and large lawns. The easy-to-program LCD screen offers independent programming of each valve with the ability to operate two valves simultaneously. This model includes a sensor input and can designate valve use to use with a soil moisture sensor to conserve water. Features also include (but are not limited to): monthly water budgeting, rain delay, auto restart, identification of short...

This outdoor wall-mounted irrigation and propagation controller operates up to 9 or 12 (depending on model selection) control valves with a master valve or pump start. They come in a UV resistant and water-tight outdoor enclosure. The easy-to-program LCD screen offers independent programming of each valve with the ability to operate two valves simultaneously. This model includes a sensor input and can designate valve use to use with a rain sensor, soil moisture sensor, etc. to conserve water. Features include (but are not limited to): monthly water budgeting, rain delay, auto restart, identification of short circuits in the system, 9V...

The General Hydroponics® Dual Diaphragm air pump is extremely quiet and the only air pump in the world manufactured exclusively for hydroponics systems. This high output pump has four adjustable 1/4 in outputs that can be teed off to power up to twelve air driven hydroponics growing systems such as the WaterFarm. In addition, growers who use our Dual Diaphragm air pump can use it to reliably oxygenate their reservoir with air stones. 3 psi, 320 gph (20 L/min).