AXEON HYDRO RO 750 Hyperfiltration Smart Water System

The future of RO water filtration has arrived.

AXEON HYDRO RO 750 Hyperfiltration Systems use advanced reverse osmosis membrane technology for removing +96% contaminants from feed water sources. The systems are designed and engineered for maximum flow and efficiency rates, meaning less water down the drain and more purified water for use.

Simply put, AXEON® HYDRO RO Systems are the most efficient systems in the industry. They produce less wastewater than competing models and are equipped with all the bells & whistles a grower needs, all at an affordable price.

AXEON HYDRO RO 750 
The RO system design features a smart controller with integrated functions and monitoring, while offering hassle-free installation and maintenance.

FEATURES

• Smart Controller TDS Monitor - inbound & outbound water readings
• Filter & Membrane Replacement Notification 
• Automatic Flush Cycle Extends Membrane Life
• Easily Removable EZ-Twist Cartridges
• Hyperfiltration RO Membranes
• Leak Detector with Auto Shut Off
• Float Valve Automatically Shuts Off System

INCLUDES: Pre-filters, Membranes, Float & Tubing

EZ-Twist Cartridges, 3-Pack, item AH3030

• Stage 1: EZ-Twist Sediment Filter 
• Stage 2: EZ-Twist Carbon Block 
• Stage 3: EZ-Twist Carbon Block 

*Not sold individually, sold in 3-Pack kit

Hyperfiltration Membranes, 2-Pack, item AH2020

• Stage 4: RO Membrane x2 

RO-750 Performance:

• (Per Minute) .52 gallons pure water 
• (Per Hour) 31.25 gallons pure water 
• (Per Day) 750 gallons pure water

RO-750 Efficiency Rate:

• 2.5-Gallons pure water output vs 1-Gallon wastewater
• 71% efficiency rate (pure water output percentage)

Additional Benefits:

• Lower waste water VS competing RO systems
• Higher efficiency VS competing RO systems
• Industry first smart control with TDS monitor (in & out readings)
• Filter and membrane change reminder based off water usage
• EZ Twist filter cartridges allow changing filters in seconds
• Reduces heavy metals & harmful chemicals like PFAS, Fluoride, chlorine, chloramines…

Filter & Membrane Replacement Schedule

• EZ Twist Cartridges:  Every 3-6 months / Minimum of 6,500 gallons of purified water produced
• Hyperfilter RO Membranes:  Every 6-12 months

*Smart control reminder function alerts when to change Membranes & EZ-Twist Cartridges

Voltage & Amperage Draw

• 115V, 60Hz, 1PH, 1.0A

Minimum Water Pressure

• Minimum 40 psi inlet pressure

System Capabilities & Performance
Low temperatures and feedwater quality, such as high TDS levels, will significantly affect the systems production capabilities and performance. Use on microbiologically safe water only and follow all state and federal plumbing and electrical codes. 

Warranty Evaluation Test Conditions: Permeate flow rates and salt rejection based on the following test conditions – 550 ppm, filtered and dechlorinated municipal tap water, 77 °F / 25 °C, 15% recovery, 7.0 pH and the specified operating pressure for membrane element type. Data taken after 60 minutes of operation.