Cloning Machines

The new EZ-Clone Low Pro 64 White has been made from fully recyclable HDPE which highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also has a specially designed recessed drain that allows for high protection and easy draining. These are just some of the 75 plus improvements designed specifically to make cloning even easier.

The new EZ-Clone Lo Pro 128 Black overall height has been reduced by four inches, while increasing the structural integrity of the new proprietary Lid and Reservoir. Manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leak-proof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent tipping. It also includes four different colored cloning collars.

The new EZ-Clone Lo Pro 128 overall height has been reduced by four inches, while increasing the structural integrity of the new proprietary Lid and Reservoir. Manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leak-proof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent tipping. It also includes four different colored cloning collars.

EZ-Clone is proud to announce the introduction of the brand new 16 Site Low Pro System. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It's perfect for cloning a variety of plants in small areas.

EZ-Clone is proud to announce the introduction of the brand new 16 Site Low Pro System now in white. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It's perfect for cloning a variety of plants in small areas.

EZ-Clone is proud to announce the introduction of the brand new 32 Site Low Pro System. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It's perfect for cloning a variety of plants in small areas.

EZ-Clone is proud to announce the introduction of the brand new 32 Site Low Pro System now in white. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It's perfect for cloning a variety of plants in small areas.

The new EZ-Clone 64 Lo Pro Black has been made from fully recyclable HDPE which is highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also has a specially designed recessed drain that allows for high protection and easy draining. These are just some of the 75 plus improvements designed specifically to make cloning even easier.

EZ-Clone Colored Cloning Collars are designed specifically to be used in the EZ-Clone Cloning Systems. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-Clone Colored Cloning Collars are available in four vivid colors, green, purple, white, and grey. All four colors come in packs of 35.

EZ-Clone Colored Cloning Collars are designed specifically to be used in the EZ-Clone Cloning Systems. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-Clone Colored Cloning Collars are available in four vivid colors, green, purple, white, and grey. All four colors come in packs of 35.

EZ-Clone Colored Cloning Collars are designed specifically to be used in the EZ-Clone Cloning Systems. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-Clone Colored Cloning Collars are available in four vivid colors, green, purple, white, and grey. All four colors come in packs of 35.

EZ-Clone Colored Cloning Collars are designed specifically to be used in the EZ-Clone Cloning Systems. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-Clone Colored Cloning Collars are available in four vivid colors, green, purple, white, and grey. All four colors come in packs of 35.

Specially designed for use in most aeroponic cloners. EZ-Clone cloning collars are manufactured from a sterile material that is designed to hold and protect your cuttings without damaging delicate tissues. Pre-slit for easy insertion of cuttings. Available in hard collars, or the original soft collars.

Specially designed for use in most aeroponic cloners. EZ-Clone cloning collars are manufactured from a sterile material that is designed to hold and protect your cuttings without damaging delicate tissues. Pre-slit for easy insertion of cuttings. Available in hard collars, or the original soft collars.

Specially designed for use in most aeroponic cloners. EZ-Clone cloning collars are manufactured from a sterile material that is designed to hold and protect your cuttings without damaging delicate tissues. Pre-slit for easy insertion of cuttings. Available in hard collars, or the original soft collars.

Specially designed for use in most aeroponic cloners. EZ-Clone cloning collars are manufactured from a sterile material that is designed to hold and protect your cuttings without damaging delicate tissues. Pre-slit for easy insertion of cuttings. Available in hard collars, or the original soft collars.

Developed with cuttings in mind, EZ-Clone Rooting Compound is superior gel that aids in root development. Packed with all the essential nutrients and hormones that roots need to begin a healthy life. This unique formula was designed specifically for the EZ-Clone Cloning Systems but works great with all forms of propagation.

EZ-Clone ultra efficient, super high output water pumps are great for any application. The pump is smaller in physical size, creating less heat. Fully coated impellers make for a smooth and quiet operation.