Humidity Controller - Innovative Tool and Design

The INNO-HUMCTRL is a digital humidity controller featuring a 15-foot sensor, precise humidity control, and a photocell for day and night adjustments. It can manage both humidifying and dehumidifying devices, with separate settings for day and night humidity levels.

COMPATIBILITY
This controller is compatible with all the humidifiers and dehumidifiers listed. Please contact us for any product-related inquiries.

FEATURES
Dehumidify Mode: If the set-point is 80% rH and the humidity exceeds 80% rH, the dehumidifier will activate until it lowers the humidity to 75% rH.
Humidify Mode: If the set-point is 80% rH and the actual humidity is below 80% rH, the humidifier will activate until it raises the humidity to 85% rH.
Humidify/Dehumidify Mode: Press and hold the knob for 3 seconds, then turn to select either Humidify or Dehumidify mode. Press the knob again to save the set point, indicated by a lit LED. Click the knob to display "day," then press and turn to set the day humidity level. Press again to enter the night humidity setting, indicated by "night" on the display. Turn to set and save the setting with another press.
Day mode: The controller is active only when the photocell detects light in the grow space.
24 hours: The controller is active both day and night.
Night mode: The controller is active only when the photocell detects darkness in the grow space.
Output: LED indicates when the output is active.

SPECIFICATIONS
Max Amp: 10 Amps at 120V AC, 60Hz
DAY Humidity Setting: Adjustable from 15% to 90% RH
NIGHT Humidity Setting: Adjustable from 15% to 90% RH
Humidity Dead-Band (Hysteresis): 5% RH
Sensor Cord Length: 15 ft
Weight: 2 lbs
Dimensions: 7.6” x 3.8” x 3.6”
For indoor use only
Operating temperature: 50°F to 95°F
Maximum relative humidity: 95%

FACTOR SETTINGS
Day Humidity Factory setting: 50% RH
Night Humidity Factory setting: 50% RH
Humidity Mode Factory setting: Dehumidify