All products

TECHNICAL SPECS
 
· Conveyor belt size: 100 x 100 mm
· Belt height from floor: 950 ± 50 mm
· Chain width: 82.5 mm 
· Structure of the machine made of SS 304, positioned on adjustable feet in height, built in high resistant material.
· Safety protections stop the machine should a problem occur on the stars preventing bottles from breaking and machine damaging.
· Stainless steel electrical panel placed at machine side with ‘auxiliaries’ commands at 24 volts.
· Electronic controls of the machine via PLC touch screen.
· All devices in charge with transfer and movement of the bottles are realised in HD polyethylene to ensure the minimum wear and a fully silent functioning.
· Complete with entry sensor for automatic start and exit sensor for “too many bottles” accident
· Machine supplied with one set of tools for working one product format and “one cap” format.

PLC & ELECTRICAL CABINET
 
Stainless steel electric board with low voltage controls, placed at machine side. Complete with electrical photocells placed in the enter and on the exit, in the case of problems and no arrival of bottles, the machine stops. Machine speed electronically adjusted by means of inverter. The Machine is complete with stainless steel electric board with low voltage controls, placed at machine frame side. Electronic control of the machine by a SIEMENS PLC touch screen. (Allen-Bradley or other brands available on demand).

PRELIMINARY / INDICATIVE Voltage
400 Volt 3PH + N + T
Frequency
50 Hz
Auxiliary
24V
Power consumption
7.5 kW
Air consumption
950 Lt. / Min at 14.5 PSI

· Suitable to close PLASTIC / GLASS bottles with pre-threaded caps.
· Automatic machine complete with cap sorter placed on independent frame with manual height adjustment.
· Horizontal cap transport with photocells.
 
PICK & PLACE Divide
 
· Closing head built in SS 304
· The closing head installed on the capper is a hysteresis closing head with continuous torque. The hysteresis technology offers transmission without contact and therefore without wear. The hysteresis capping heads ensure high accuracy of repetition of the torque (± 2%) and with their continuous closing torque (no impact), are therefore the optimal choice for the application of plastic pre-threaded screw caps, better suited than conventional magnetic heads with permanent magnet and with intermittent torque. The capping head limit torque can be adjusted up to 3.4 Nm. SS 304 heads provide excellent corrosion resistance and wear.

• Electronic control of the electro valves by means of an encoder, adjustable by the PLC.
• Electrical adjustment of the speed by inverter.
• Manual height adjustment.
• 1 M of conveyor at machine inlet.
• 1 M of conveyor at machine outlet.
• Conveyor belt motorization.

• Display: 10″ Omron Touch Screen
• Hopper Volume: 0.2L – 0.5L
• Weigher Driving System: Stepper Motor
• Single Weigher Range: 1 – 200g
• Accuracy: ± 0.05 – 0.5g
• Max speed: 60 ppm
• Material: 304 Stainless Steel
• Count by Weight System Included
• Dimple and/or Mirrored Buckets
• Gross Weight: 220kg
• Power Requirement: 220V/900W/60HZ/8A
• Easy Removable Contact Parts for Cleaning. Tooless Removable.

• Bag Width: 60mm ≤ Width ≤ 150 mm
• Bag Length: 110mm ≤ Width ≤ 210 mm
• Bag shape: Standup Pouch, 3-side Sealed Pouch, Box Pouch
• Max Speed: Up to 20 BPM with 1s Discharge Filling time without zipper opener. 17 BPM with 1s discharge time and zipper opener

• Driver: German NOVEXX
• Speed: 50-150 (depends on product and label size)
• Labeling Accuracy: ±1.0 mm
• Label Inner Diameter: 76 mm
• Label Outer Diameter: 350 mm(max)
• Label Sizes: L: 15-300mm，W:15-110mm
• Tag Sizes: L: 20-300mm , W:30-300mm
• Air Requirements: 5kg/cm ² / 72 PSI
• Voltage: 110V or 220V
• Machine size: 2200（L） 1000 (W) 1300 (H) mm

• Display: 10” Omron Touch Screen
• Hopper Volume: 1L – 1.6L
• Weigher Driving System: Stepper Motor
• Single Weigher Range: 2 – 200g
• Accuracy: ± 0.1g
• Max Speed: up to 120 ppm
• Material: 304 Stainless Steel
• Count by Weight System included
• Dimple and/or Mirrored Buckets
• Gross Weight: 500kg
• Power requirement: 220V/1500W/60HZ/10A
• Easy Removable Contact Parts for Cleaning. Tooless removable.

• Quantity of filling head: 4 heads
• Filling capacity: 10g-2000g
• Filling method: Equal-liquid level self flowing type
• Filling speed: 20-25 cans/min
• Filling accuracy: ±1>#/li###
• Program control: PLC touch screen
• Main materials: 304 stainless steel
• Air pressure: 0.6-0.8Mpa
• Conveyor motor: 370W frequency conversion speed regulation motor -Power: 1KW/380V 60Hz
• Capacity of material tank: 200L (with liquid level switch)

• Main machine structure in steel
• With covers in stainless steel
• Product contact parts in stainless steel
• 1600 mm long infeed conveyor with nylon pushers
• 2 sets of wheels for longitudinal sealing
• Transverse rotary sealing jaw
• Reel holder with expanding shaft
• Discharge conveyor belt complete of AC motor
• 3 brushless servomotors
• Control panel with a 4.3” HD touch screen

Optional:

• Photocell for print registered film
• Printers
• Two or more up-jaws
• Special loading systems
• Zig-zag knives
• Euroslot die cutting system
• Full Inox version

• Bag Material: Multilayer Composite Pre-made Bag（e.g.: PET/PE)
• Bag Type: Doy bag, Zipper bag, Edging bag 4 sides, Edging bag 3 sides, Paper bag
• Upgradable Bag Type: Gusset Bag, Zipper Bag, Flat Bottom Pouch
• Size Range: W:80~200mm | L: 80~380mm
• Speed: 30-60 ppm (pre-opened zipper)
• Voltage: 220V, Single-phase, 60HZ, 2.5KW
• Air Pressure: 0.65Mpa
• Air Consumption: 0.4m³/min（Supplied by user）
• Body Dimension: 1710 x 1505 x 1640mm
• Touch Screen: 7″ color touch screen

• Power: 1500 Watt, 220V 60Hz
• Air Pressure: 0.4-0.6 MPa
• Speed: Up to 50 labels per minute
• Precession: 1.0mm
• Label Sizes: L: 20mm-471mm x H: 10mm-180mm
• Cap Sizes:20mm-180mm
• Container Sizes: Outer Diameter 40mm-150mm / H: 30-200mm
• Label Roll Inner Diameter: 76mm
• Label Roll Outer Diameter: 360mm (max)
• Size: 2000mm x 1050mm x 1600mm
• Weight: 385lbs

• Full servo motion control system
• 10” HMI LCD Touch control operating system
• Film centering system
• Servo controlled scissors
• Servo controlled pouch opening system with vacuum
• Photocell Control System
• Heavy duty construction
• Servo controlled pouch stretching system ◊ No open pouch no fill system
• Inverter controlled unwind system
• Stainless steel machine body

Optional:

• Tear notch system
• Pre-Made Pouch Module
• Shipped bag molding
• Top spout and corner spout application system
• Round corner application system
• Euro or punch hole application system
• Gas flushing system
• Printer and labeling connection system
• Zipper perforation and opening system

• Conveying System with end tables
• Stainless Steel Frame
• Feeding Speed: 400 m/h
• Pneumatic Vibration

• Labeling location with high precision.
• Product quantity can be controlled.
• No tube no labeling, it can monitor and correct automatically if there is no label.
• Speed 40-100 PPM
• Labeling Precision < + 1mm
• Power Supply 220V/60Hz
• Label Length 20-200mm
• Label Width 10-100mm
• Power 0.5kw
• Weight 250KG
• Dimension 2000*650*1350mm(W*D*H)

• Power Supply Voltge: AC 110V / 60 Hz
• Power: 1200 Watt
• Bottle / Jar Sizes: External – 30-100mm Height: 30-200mm
• Label Size: Height 15-130mm
• Speed: Up to 60 per minute
• Dimensions: (mm) 2000x900x1400
• Net Weight: 440 lbs

• Power Supply Voltge: AC 220V / 60 Hz
• Power: 1270 Watt
• Bottle / Jar Sizes: External – 30-100mm Height: 30-200mm
• Label Size: Height 15-130mm
• Speed: Up to 50 per minute
• Dimensions: (mm) 2050 x 1070 x 1420
• Net Weight: 485 lbs

• Power: 1500 Watt, 3P 220V 60Hz
• Speed: Up to 50 labels per minute
• Carton Gram Requirements: 250-350g/m3
• Label Sizes: L: 20mm-471mm x H: 10mm-180mm
• Air Consumption: 150L/min
• Air Pressure: 0.5-0.8 Mpa
• Size: 1100×1500×1900 mm
• Weight: 551 lbs

• Parts in contact with product in AISI 304 Stainless Steel.
• Various Types of Bags, pillow, gusset, doy, quad, block bottom, string bags etc.
• Main machine movements (horizontal sealing group and film driving group) are driven by means of independent brushless Servo motors.
• Motion-controller system is only one controller capable of coordinating all the servo motors, all the inputs-outputs, all the control functions of the line, replacing the PLC.
• 10” LCD Color Touch Screen Panel man-machine interface.
• Extremely simple and easy to manage all machine parameters.