Dry Fog Humidifier AKIMist® - E

The AKIMist® “E” is an advanced Dry Fog humidifier that meets the industry benchmarks for air quality, electrostatics, and climate control. Its patented nozzle technology helps maintain average droplet sizes of 7.5μm or smaller, achieving precision humidification performance. The AKIMist “E” non-wetting fog humidifier yields dry fogs that are ultra-fine, non-wetting and hydroscopically active.

The AKIMist® “E” also achieves controlled precision humidity and significant energy efficiency simultaneously. Its adjustable spray capacity outputs between 2.4 to 13.2 L/hr, depending on the nozzle type and quantity used. All this comes at a fraction of the steam-based humidifiers energy consumptionals. It is best used in spaces where sensitive materials or equipment vulnerable to moisture or static damage are situated.

Grasping the Science Behind Dry Fog

Aerosol systems which are termed as 'dry fog' are designs where the droplets are of 10 microns in diameter and with a certain characteristic they do not burst or wet surfaces they touch. These features permit high levels of gas saturation without excessive moisture that could harm equipment, products, personnel and automated systems. Different from other dry mist systems lacking a technical specification for minimum droplet size which wet surfaces, AKIMist® “E” outperforms its competition by using a proprietary nozzle system that guarantees no greater than 10 μm sized droplets and achieves consistent and predictable results.  

When the fog droplets are projected towards a surface, they do not burst upon impact due to the explosion of smaller fog droplets known as cold phase explosion. This feature allows the user to aim for the electronics and workstations that require a wipe-free cleaning without any liquid moistening the surface so the unit is ideal for cleanrooms, production lines, or sensitive storage spaces.

Key Attributes  

• Ultra-fine Dry Fog is delivered using pneumatic spray nozzles and does not wet surfaces.  
• Depending on the configuration, the spray rate is set to anywhere ranging from 2.4 to 13.2 L/hr.  
• It operates under a compressed air pressure of between 0.2 to 0.5 MPa.  
• The units are estimated to cost approximately steam system services 1/5 the amount required to run these units.  
• Standard TN variants for spraying chemical solutions are resistant E (endure) to the chemicals.  
• Ergonomically designed for ease of operation, the unit is lightweight at around 340g, comfortably within the user’s hand.  
• Modular design allows customization of Personalized nozzles ranging from 1-4 per unit.  
• Optional stop plugs for less than over coverage customizable area reduce nozzles for customizable spray area.  

AKIMist® “E” precision trim adjusts airflow for exact control over spray volume, droplet size, and overall facility requirements. Guidance is achieved through interchangeable nozzles (03C, 03B, 04E).  

Saving Power and Efficiency  

Reduction in AKIMist® “E” features is the most appealing aspect of the device. Without heating air or water, running the equipment costs virtually unmeasured. Operational estimates claim AKIMist® “E” is 5 times more affordable than other steam humidifiers on the market. These estimations are remarkable for larger more industrial focused businesses looking to reduce overhead spending.

Upon combining the system’s fog diffusion technology with the unit’s energy-saver capabilities, cooling is achieved through a further reduction in evaporative temperature of approximately 2°C.

Fogging System's Important Industrial Applications

Preventing Electrostatic Discharge

AKIMist® “E” has been tailored to remove static electricity which, during the assembly and electronics construction steps, misaligns parts due to dust, component damage, and assembles parts on an interface-level interface surface at its assemb. Added to this, Dry Fog ESD protectively shields the circuits, devices, and precision instruments from electrostatic discharge.

Printing and Paper Processing

In printing, shrink wrapping, and in paper industries, the system mitigates the curl or web breaks of paper as well as improves ink quality consistency. It aids in actively preventing the static that causes printing operations to be interrupted while suppressing dust that clogs rapid printing.

Coatings, Paints and Energy Sectors

In the paint and coat processes, scrubbing static makes AKIMist® “E” effective for preventing contamination, fire and surface defects. It is used to control the humidity of sensitive parts in the energy and automotive sectors.

Gas spray humidifiers, electronic humidifiers, or thermal and vapor fog humidifiers are the most suitable for use in STEM and medical laboratories, caregiving facilities for elderly or chronically ill patients, and in power producing machinery and plants.

Some of the other equally useful applications include

• Agricultural Biosecurity: Controlling commercial and industrial biosecurity.
• Livestock and Agriculture: Regions where warehouse food storage sites are prone to being chemically contaminated.
• Textile and Plastic Manufacturing: Ensuring ascertaining particles and smoke contaminants in textiles and plastis as solid airborne particulates are not present.

Construction Techniques III allows customizing AKIMist “E” The construction modules offered in the provided Pdf building file together with the computer aided design contains installation kits made of polypropylene, stainless steel 303, PPS, PTFE, and other chemically resistant soft elastomers. Gaps within flexible shutters alongside adjustable nozzles and installable hoses facilitate effortless humidifier model form to user requirement alteration. Detailed working guide illustrates step by step control of evacuation for the planting phase in auto sequence chrono steering guaranteeing operational safety in the presence of vapors or ignitable fine powder based porogenic plugable quencher substances.

Final Words

The AKIMist “E” humidifier sets the limit for the maximum achievable precision in industrial humidification processes. In static, heat, or dust challenging environments trusted unmanned swing hose critical control periphery seamless internal operational processes, AKIMist “E” offers safety braised static and heat remote sensitive self-uncapping control. Unmanned and touch-free operation. With superb anti-contamination precision non-contact steam atomization, static mist defeat with full conviatu fog.  

These benefits, alongside low energy consumption during one hour of operation, maintenance required over time, along with the contraptions lightweight build, offers a substantial adaptable edge, sustaining enduring competitive advantage for environmental altering devices. Within the electronics, food, and manufacturing sectors, as well as the coating processes, and others, AKIMist “E” addresses the self-contained demand for enhanced operational safety and control without the extrapolated needs of increased humidity levels which most traditional systems rely on.