1610 Injectors One Piece 7000/5810/5812

The Good Water Warehouse 1610 Series Injectors are high quality one piece injector assemblies, and are designed for accurate brine draw in Fleck 7000, 5810 and 5812 control valves. High capacity and highly efficient, these ready-to-assemble injectors do away with throat and nozzle parts and require less manpower to install and maintain.

Each model is a color-coded and a size-specific unit, designed for use with a particular tank diameter, for correct suction flow and dependable regeneration cycles.

Brine Draw Single/MValve Simplified with One-Piece Design

With a two-part assignor system, 1610 Series couples both throat and nozzle in one casted assembly. This all-in-one assembly:

• Cuts installation time and will not snap the band out-of-round!
• Designed to be serviced with a minimal number of parts and connections4.
• Improves the uniformity of vacuum during regeneration periods

Great for professional and installer who demands excellent with simplicity, this injector is the perfect replacement for your Fleck 7000, 5810 or 5812 originals.

Tank Size Compatibility

Each injector assembly is set up for a certain size tank and color coded for quick reference:

• Violet #00: Best for 9 in and 10 in tanks
• Red #0: Used in 12 inch and 13 inch tanks
• White #1: For 14" and 16" Tanks
• Blue #2: Sized for 18" tanks
• Yellow #3: Matches 20" tanks
• Green #4: For 21" tanks
• Gray #5: Ideal for 24" tanks

These injectors provide consistent brine draw and the maximum use of softening material in rinse.

Compatible Valve Models

These bolt on one piece injectors are made for:

• Fleck 7000
• Fleck 5810
• Fleck 5812

Every assembly slides through valve injector port for accurate operation of brine cycle stages.

Construction and Operational Benefits

• Molded one-piece with no fittings required
• Constructed of corrosion resistant materials for use in the most brine conditions
• Color-coded to eliminate size identification errors
• Keeps the correct suction flow rate and restriction during brine draw
• Makes servicing in the field easier for technicians

They are perfect for system maintenance, upgrades or new installations and are available in pressure-compensating or non-pressure compensating models.

Accurate Pricing by Quantity

Price each for easy ordering - All injectors in this series are the same price:

• $10.78 each (1+ units)
• $9.24 each (10+ units)
• $8.78 each (24+ units)
• $8.47 each (48+ units)

This makes the 1610 Series an affordable option for both single replacements and multiple piece orders.

Final Words

Good Water Warehouse 1610 Injectors (One Piece)The 1610 Injectors (One Piece) by Good Water Warehouse can provide dependable brine draw in one convenient product. Featuring sizing specifically for 9-24" tanks and ability to fit Fleck 7000, 5810 and 5812 valves, these injectors offer unparalleled ease of use and regeneration efficiency consistency. Coded for quick and easy readings and constructed to last, they are the first choice for water treatment professionals.