Valumax 2510SXT - Electronic Metered Control

The Valumax 2510SXT – Electronic Metered Control from Good Water Warehouse is a state of the art water softening system designed for the long haul, simple to use and easy to install. Featuring Fleck’s famous 2510SXT metered valve, the FCSS provides reliable regenerations based on actual water usage so you’ll be using less salt and water, and your system will last longer.

Sizes are from 1.0 to 4.0 cubic ft. and can handle a flowrate up to 400 pounds per minute, and a backwash up to 50 GPM, that will handle a variety of application with service flow rates from 5 to 20 GPM, and backwashes flow rate from 15 to 40 GPM, with ranges from 30000 to 120000 grains capacity, this would supporter for all water softener applications such as residential whole house, light commercial setups, or softener in a light industrial system.

Fleck 2510SXT Valve: Designed for Precision and Longevity

Digitally Metered Regeneration

At the center of the Valumax 2510SXT – Electronic Metered Control is the Fleck 2510SXT valve that harnesses the power of metered-demand regeneration; the 2510СХТ regenerates based on actual water use. The result is that the system is able to stay efficient, regenerating only when necessary, which means big savings on salt and water.

Onboard Capacitor with Power Memory

This model also has a built-in capacitor to keep time-of-day, and the schedule up to 48 hours in the event of a power failure. This feature allows the softener to remain in service, if a power interruption takes place, without having to reset the timer, providing valuable peace of mind, while at the same time making the appliance even more reliable and convenient.

SXT Digital Interface

Users with the SXT interface are in full control of their softener’s performance. From cycle timing to salt dosage and rinse cycles, the menu-driven programming on the system creates a high level of customization. Diagnostic modes aid in trouble shooting, and factory defaults enable quick set up for common uses.

Multi-Cycle Efficiency for Precise Softening

Five Adjustable Softening Cycles

The Valumax 2510SXT – Electronic Metered Control offers a five-cycle regeneration process, which consists of:

• Upflow backwash
• Downflow brining
• Slow rinse
• Rapid rinse
• Brine refill

Each cycle is individually configurable, so water treatment professionals and end-users can customize the system to meet water conditions, family size or personal usage preferences.

Hydraulically Balanced Mechanism

A forged piston, seal and spacer assembly provides hydraulic balance and factory load testing ensure components meet design specifications for quality you can count on. This internal layout preserves flow rates and cuts mechanical wear on the valve body over the years.

Structural Integrity with High-Performance Flow

Durable Polymer Valve Housing

Featuring a non-corrosive, fiber-reinforced polymer body, the Fleck valve is built to last and withstand the harshness of the water or environment. Its tough construction means it's perfectly suited to permanent installations, indoors or wherever exposed in utility areas.

Flow Rate Capacity

The Valumax 2510SXT – Electronic Metered Control provides a magnificent flow rate chronic of todays 19 GPM topping out at 24 GPM. This guarantees a never-ending flow of hot water when demand is the highest, such as when you have a shower or start with more than one hot water appliance at the same time.

Tank Compatibility

With a 16-inch tank diameter, it provides backwash for tanks up to 16 inches and is versatile enough for softener as well as filter applications. For maximum resin capacity and regeneration performance each model has a specific tank and brine system.

Available Models and Capacities

• CVM-1. 0-2510SXT: 1.0 CUFT - 30,000 grains
• CVM-1. 5-3 -To 1.5 CUFT – 45k 5-2510SXT: 1.5 CUFT – 45,000 GRAINS
• CVM-2. 0-2510SXT: 2.0 CUFT – 60,000 Grain
• CVM-2. 5-2510SXT: 2.50 CUFT – 75,0000 grains
• CVM-3. 0-2510SXT: 3.0 CUFT - 90,000 Water Softener grains
• CVM-4. ” 0-2510SXT : 4.0 CUFT – 120,000 grains”

Each model includes a heavy duty brine tank and high impact resin tank for a long, reliable life with the ability to withstand high amounts of them when undergoing the regeneration process.

Final Words

Whether you’re looking to improve your home, or need a performant softener for your business that offers a customizable programming and dependable operation, the Valumax 2510SXT – Electronic Metered Control is the perfect solution. Its metered pronghorn", extrusion and smart digital interface are unique to the industry providing unparallel control & cost savings. This water softener does well in those three aspects and is a good choice for users seeking reliability, simplicity and low maintenance.